Hi Maxime,
On 9/3/20 5:01 PM, Maxime Ripard wrote:
> Now that all the drivers have been adjusted for it, let's bring in the
> necessary device tree changes.
>
> The VEC and PV3 are left out for now, since it will require a more specific
> clock setup.
>
> Reviewed-by: Dave Stevenson <dave.steven...@raspberrypi.com>
> Tested-by: Chanwoo Choi <cw00.c...@samsung.com>
> Tested-by: Hoegeun Kwon <hoegeun.k...@samsung.com>
> Tested-by: Stefan Wahren <stefan.wah...@i2se.com>
> Signed-off-by: Maxime Ripard <max...@cerno.tech>
Thanks for your v5 patch
Reviewed-by: Hoegeun Kwon <hoegeun.k...@samsung.com>
Best regards,
Hoegeun
> ---
> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 48 +++++++++++-
> arch/arm/boot/dts/bcm2711.dtsi | 122 ++++++++++++++++++++++++++-
> 2 files changed, 169 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> index e94244a215af..09a1182c2936 100644
> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
> @@ -70,6 +70,14 @@
> };
> };
>
> +&ddc0 {
> + status = "okay";
> +};
> +
> +&ddc1 {
> + status = "okay";
> +};
> +
> &firmware {
> firmware_clocks: clocks {
> compatible = "raspberrypi,firmware-clocks";
> @@ -170,6 +178,38 @@
> "RGMII_TXD3";
> };
>
> +&hdmi0 {
> + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>,
> <&clk_27MHz>;
> + clock-names = "hdmi", "bvb", "audio", "cec";
> + status = "okay";
> +};
> +
> +&hdmi1 {
> + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>,
> <&clk_27MHz>;
> + clock-names = "hdmi", "bvb", "audio", "cec";
> + status = "okay";
> +};
> +
> +&hvs {
> + clocks = <&firmware_clocks 4>;
> +};
> +
> +&pixelvalve0 {
> + status = "okay";
> +};
> +
> +&pixelvalve1 {
> + status = "okay";
> +};
> +
> +&pixelvalve2 {
> + status = "okay";
> +};
> +
> +&pixelvalve4 {
> + status = "okay";
> +};
> +
> &pwm1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
> @@ -253,3 +293,11 @@
> &vchiq {
> interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> +&vc4 {
> + status = "okay";
> +};
> +
> +&vec {
> + status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 00bcaed1be32..4847dd305317 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -12,6 +12,18 @@
>
> interrupt-parent = <&gicv2>;
>
> + vc4: gpu {
> + compatible = "brcm,bcm2711-vc5";
> + status = "disabled";
> + };
> +
> + clk_27MHz: clk-27M {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <27000000>;
> + clock-output-names = "27MHz-clock";
> + };
> +
> clk_108MHz: clk-108M {
> #clock-cells = <0>;
> compatible = "fixed-clock";
> @@ -238,6 +250,27 @@
> status = "disabled";
> };
>
> + pixelvalve0: pixelvalve@7e206000 {
> + compatible = "brcm,bcm2711-pixelvalve0";
> + reg = <0x7e206000 0x100>;
> + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + pixelvalve1: pixelvalve@7e207000 {
> + compatible = "brcm,bcm2711-pixelvalve1";
> + reg = <0x7e207000 0x100>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + pixelvalve2: pixelvalve@7e20a000 {
> + compatible = "brcm,bcm2711-pixelvalve2";
> + reg = <0x7e20a000 0x100>;
> + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> pwm1: pwm@7e20c800 {
> compatible = "brcm,bcm2835-pwm";
> reg = <0x7e20c800 0x28>;
> @@ -248,10 +281,25 @@
> status = "disabled";
> };
>
> - hvs@7e400000 {
> + pixelvalve4: pixelvalve@7e216000 {
> + compatible = "brcm,bcm2711-pixelvalve4";
> + reg = <0x7e216000 0x100>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + hvs: hvs@7e400000 {
> + compatible = "brcm,bcm2711-hvs";
> interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + pixelvalve3: pixelvalve@7ec12000 {
> + compatible = "brcm,bcm2711-pixelvalve3";
> + reg = <0x7ec12000 0x100>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> dvp: clock@7ef00000 {
> compatible = "brcm,brcm2711-dvp";
> reg = <0x7ef00000 0x10>;
> @@ -259,6 +307,78 @@
> #clock-cells = <1>;
> #reset-cells = <1>;
> };
> +
> + hdmi0: hdmi@7ef00700 {
> + compatible = "brcm,bcm2711-hdmi0";
> + reg = <0x7ef00700 0x300>,
> + <0x7ef00300 0x200>,
> + <0x7ef00f00 0x80>,
> + <0x7ef00f80 0x80>,
> + <0x7ef01b00 0x200>,
> + <0x7ef01f00 0x400>,
> + <0x7ef00200 0x80>,
> + <0x7ef04300 0x100>,
> + <0x7ef20000 0x100>;
> + reg-names = "hdmi",
> + "dvp",
> + "phy",
> + "rm",
> + "packet",
> + "metadata",
> + "csc",
> + "cec",
> + "hd";
> + clock-names = "hdmi", "bvb", "audio", "cec";
> + resets = <&dvp 0>;
> + ddc = <&ddc0>;
> + dmas = <&dma 10>;
> + dma-names = "audio-rx";
> + status = "disabled";
> + };
> +
> + ddc0: i2c@7ef04500 {
> + compatible = "brcm,bcm2711-hdmi-i2c";
> + reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
> + reg-names = "bsc", "auto-i2c";
> + clock-frequency = <97500>;
> + status = "disabled";
> + };
> +
> + hdmi1: hdmi@7ef05700 {
> + compatible = "brcm,bcm2711-hdmi1";
> + reg = <0x7ef05700 0x300>,
> + <0x7ef05300 0x200>,
> + <0x7ef05f00 0x80>,
> + <0x7ef05f80 0x80>,
> + <0x7ef06b00 0x200>,
> + <0x7ef06f00 0x400>,
> + <0x7ef00280 0x80>,
> + <0x7ef09300 0x100>,
> + <0x7ef20000 0x100>;
> + reg-names = "hdmi",
> + "dvp",
> + "phy",
> + "rm",
> + "packet",
> + "metadata",
> + "csc",
> + "cec",
> + "hd";
> + ddc = <&ddc1>;
> + clock-names = "hdmi", "bvb", "audio", "cec";
> + resets = <&dvp 1>;
> + dmas = <&dma 17>;
> + dma-names = "audio-rx";
> + status = "disabled";
> + };
> +
> + ddc1: i2c@7ef09500 {
> + compatible = "brcm,bcm2711-hdmi-i2c";
> + reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
> + reg-names = "bsc", "auto-i2c";
> + clock-frequency = <97500>;
> + status = "disabled";
> + };
> };
>
> /*
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
