The 'interrupt-names' property is not described in dtschema, not used by
the driver and does not really make sense as its value is simple 'irq'.
Drop it to fix dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dt.yaml:
pmic@4b: 'interrupt-names' does not match any of the regexes:
'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 1 -
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 10f30ff85fd3..cce1b595e2d6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -289,7 +289,6 @@
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
interrupts = <3 GPIO_ACTIVE_LOW>;
- interrupt-names = "irq";
rohm,reset-snvs-powered;
regulators {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 4e50cb62654d..a78584086fa9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -640,7 +640,6 @@
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
interrupts = <7 GPIO_ACTIVE_LOW>;
- interrupt-names = "irq";
rohm,reset-snvs-powered;
regulators {
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
