Hi Laurent,
Thanks for the comment.
On Thu, Jul 30, 2020 at 04:12:46PM -0700, Laurent Pinchart wrote:
> Hi Hyun,
>
> Thank you for the patch.
>
> On Wed, Jul 29, 2020 at 04:30:45PM -0700, Hyun Kwon wrote:
> > Use switch - case to downshift from the current link rate. It's a small
> > loop now, so fine to be replaced with switch - case. With a loop, it is
> > confusing and hard to follow as reported below.
> >
> > The patch d76271d22694: "drm: xlnx: DRM/KMS driver for Xilinx ZynqMP
> > DisplayPort Subsystem" from Jul 7, 2018, leads to the following
> > static checker warning:
> >
> > drivers/gpu/drm/xlnx/zynqmp_dp.c:594 zynqmp_dp_mode_configure()
> > error: iterator underflow 'bws' (-1)-2
> >
> > Reported-by: Dan Carpenter <dan.carpen...@oracle.com>
> > Signed-off-by: Hyun Kwon <hyun.k...@xilinx.com>
> > ---
> > v2
> > - Convert the for loop into switch - case
> > ---
> > ---
> > drivers/gpu/drm/xlnx/zynqmp_dp.c | 29 ++++++++++++++++-------------
> > 1 file changed, 16 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> > b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> > index b735072..5d6adeaa 100644
> > --- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> > +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> > @@ -567,34 +567,37 @@ static int zynqmp_dp_mode_configure(struct zynqmp_dp
> > *dp, int pclock,
> > u8 current_bw)
> > {
> > int max_rate = dp->link_config.max_rate;
> > - u8 bws[3] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
> > + u8 bw_code;
> > u8 max_lanes = dp->link_config.max_lanes;
> > u8 max_link_rate_code = drm_dp_link_rate_to_bw_code(max_rate);
> > u8 bpp = dp->config.bpp;
> > u8 lane_cnt;
> > - s8 i;
> >
> > - if (current_bw == DP_LINK_BW_1_62) {
> > + /* Downshift from current one */
>
> Maybe "Downshift from the current bandwidth" ?
>
> Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
>
I agree. I'll fix and add the tag.
Thanks!
-hyun
> > + switch (current_bw) {
> > + case DP_LINK_BW_5_4:
> > + bw_code = DP_LINK_BW_2_7;
> > + break;
> > + case DP_LINK_BW_2_7:
> > + bw_code = DP_LINK_BW_1_62;
> > + break;
> > + case DP_LINK_BW_1_62:
> > dev_err(dp->dev, "can't downshift. already lowest link rate\n");
> > return -EINVAL;
> > - }
> > -
> > - for (i = ARRAY_SIZE(bws) - 1; i >= 0; i--) {
> > - if (current_bw && bws[i] >= current_bw)
> > - continue;
> > -
> > - if (bws[i] <= max_link_rate_code)
> > - break;
> > + default:
> > + /* If not given, start with max supported */
> > + bw_code = max_link_rate_code;
> > + break;
> > }
> >
> > for (lane_cnt = 1; lane_cnt <= max_lanes; lane_cnt <<= 1) {
> > int bw;
> > u32 rate;
> >
> > - bw = drm_dp_bw_code_to_link_rate(bws[i]);
> > + bw = drm_dp_bw_code_to_link_rate(bw_code);
> > rate = zynqmp_dp_max_rate(bw, lane_cnt, bpp);
> > if (pclock <= rate) {
> > - dp->mode.bw_code = bws[i];
> > + dp->mode.bw_code = bw_code;
> > dp->mode.lane_cnt = lane_cnt;
> > dp->mode.pclock = pclock;
> > return dp->mode.bw_code;
>
> --
> Regards,
>
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
