On Sat, 25 Jul 2020 23:14:56 +0200, Marek Vasut wrote: > Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this > one is used in the Raspberry Pi 7" touchscreen display unit. > > Signed-off-by: Marek Vasut <ma...@denx.de> > To: dri-devel@lists.freedesktop.org > Cc: Eric Anholt <e...@anholt.net> > Cc: Rob Herring <robh...@kernel.org> > Cc: Sam Ravnborg <s...@ravnborg.org> > Cc: devicet...@vger.kernel.org > --- > .../display/bridge/toshiba,tc358762.yaml | 116 ++++++++++++++++++ > 1 file changed, 116 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml >
My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dts:20.13-23: Warning (reg_format): /example-0/bridge@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: example-0: bridge@0:reg:0: [0] is too short /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: bridge@0: '#address-cells', '#size-cells', 'port@0', 'port@1' do not match any of the regexes: 'pinctrl-[0-9]+' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.example.dt.yaml: bridge@0: 'ports' is a required property See https://patchwork.ozlabs.org/patch/1336337 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit. _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
