Hi Swapnil
Small nits in the following.
Sam
On Wed, Jul 22, 2020 at 09:40:40AM +0200, Swapnil Jakhade wrote:
> Add j721e wrapper for mhdp, which sets up the clock and data muxes.
>
> Signed-off-by: Jyri Sarha <jsa...@ti.com>
> Signed-off-by: Yuti Amonkar <yamon...@cadence.com>
> Signed-off-by: Swapnil Jakhade <sjakh...@cadence.com>
> Reviewed-by: Tomi Valkeinen <tomi.valkei...@ti.com>
> Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> ---
> drivers/gpu/drm/bridge/Kconfig | 13 ++++
> drivers/gpu/drm/bridge/Makefile | 5 ++
> drivers/gpu/drm/bridge/cdns-mhdp-core.c | 15 +++++
> drivers/gpu/drm/bridge/cdns-mhdp-core.h | 1 +
> drivers/gpu/drm/bridge/cdns-mhdp-j721e.c | 75 ++++++++++++++++++++++++
> drivers/gpu/drm/bridge/cdns-mhdp-j721e.h | 19 ++++++
> 6 files changed, 128 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
> create mode 100644 drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 6a4c324302a8..8c1738653b7e 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -38,6 +38,19 @@ config DRM_CDNS_MHDP
> It takes a DPI stream as input and outputs it encoded
> in DP format.
>
> +if DRM_CDNS_MHDP
> +
> +config DRM_CDNS_MHDP_J721E
> + depends on ARCH_K3_J721E_SOC
> + bool "J721E Cadence DPI/DP wrapper support"
> + default y
> + help
> + Support J721E Cadence DPI/DP wrapper. This is a wrapper
> + which adds support for J721E related platform ops. It
> + initializes the J721e Display Port and sets up the
> + clock and data muxes.
> +endif
> +
> config DRM_CHRONTEL_CH7033
> tristate "Chrontel CH7033 Video Encoder"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 0080a9f80f29..f81d606e9598 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -2,6 +2,11 @@
> obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
> obj-$(CONFIG_DRM_CDNS_MHDP) += cdns-mhdp.o
> cdns-mhdp-objs := cdns-mhdp-core.o
> +
> +ifeq ($(CONFIG_DRM_CDNS_MHDP_J721E),y)
> + cdns-mhdp-objs += cdns-mhdp-j721e.o
> +endif
Use the idiomatic:
cdns-mhdp-$(CONFIG_DRM_CDNS_MHDP_J721E) += cdns-mhdp-j721e.o
> +
> obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
> obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> b/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> index b16c5503cef1..eeb33c54334f 100644
> --- a/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-core.c
> @@ -38,6 +38,8 @@
>
> #include "cdns-mhdp-core.h"
>
> +#include "cdns-mhdp-j721e.h"
> +
> static DECLARE_WAIT_QUEUE_HEAD(fw_load_wq);
>
> static int cdns_mhdp_mailbox_read(struct cdns_mhdp_device *mhdp)
> @@ -1691,6 +1693,16 @@ static int cdns_mhdp_attach(struct drm_bridge *bridge,
>
> conn->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH;
>
> + if (of_device_is_compatible(mhdp->dev->of_node, "ti,j721e-mhdp8546"))
> + /*
> + * DP is internal to J7 SoC and we need to use DRIVE_POSEDGE
> + * in the display controller. This is achieved for the time being
> + * by defining SAMPLE_NEGEDGE here.
> + */
> + conn->display_info.bus_flags |=
> + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
> + DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
> +
> ret = drm_connector_attach_encoder(conn, bridge->encoder);
> if (ret) {
> dev_err(mhdp->dev, "failed to attach connector to encoder\n");
> @@ -2470,6 +2482,9 @@ static int cdns_mhdp_remove(struct platform_device
> *pdev)
>
> static const struct of_device_id mhdp_ids[] = {
> { .compatible = "cdns,mhdp8546", },
> +#ifdef CONFIG_DRM_CDNS_MHDP_J721E
> + { .compatible = "ti,j721e-mhdp8546", .data = &mhdp_ti_j721e_ops },
> +#endif
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, mhdp_ids);
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> b/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> index d1bfcdef4249..4e176698caca 100644
> --- a/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-core.h
> @@ -343,6 +343,7 @@ struct cdns_mhdp_bridge_state {
>
> struct cdns_mhdp_device {
> void __iomem *regs;
> + void __iomem *j721e_regs;
>
> struct device *dev;
> struct clk *clk;
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
> b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
> new file mode 100644
> index 000000000000..7555c217c9a0
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.c
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI j721e Cadence MHDP DP wrapper
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Jyri Sarha <jsa...@ti.com
> + */
> +
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +
> +#include "cdns-mhdp-j721e.h"
> +
> +#define REVISION 0x00
> +#define DPTX_IPCFG 0x04
> +#define ECC_MEM_CFG 0x08
> +#define DPTX_DSC_CFG 0x0c
> +#define DPTX_SRC_CFG 0x10
> +#define DPTX_VIF_SECURE_MODE_CFG 0x14
> +#define DPTX_VIF_CONN_STATUS 0x18
> +#define PHY_CLK_STATUS 0x1c
> +
> +#define DPTX_SRC_AIF_EN BIT(16)
> +#define DPTX_SRC_VIF_3_IN30B BIT(11)
> +#define DPTX_SRC_VIF_2_IN30B BIT(10)
> +#define DPTX_SRC_VIF_1_IN30B BIT(9)
> +#define DPTX_SRC_VIF_0_IN30B BIT(8)
> +#define DPTX_SRC_VIF_3_SEL_DPI5 BIT(7)
> +#define DPTX_SRC_VIF_3_SEL_DPI3 0
> +#define DPTX_SRC_VIF_2_SEL_DPI4 BIT(6)
> +#define DPTX_SRC_VIF_2_SEL_DPI2 0
> +#define DPTX_SRC_VIF_1_SEL_DPI3 BIT(5)
> +#define DPTX_SRC_VIF_1_SEL_DPI1 0
> +#define DPTX_SRC_VIF_0_SEL_DPI2 BIT(4)
> +#define DPTX_SRC_VIF_0_SEL_DPI0 0
> +#define DPTX_SRC_VIF_3_EN BIT(3)
> +#define DPTX_SRC_VIF_2_EN BIT(2)
> +#define DPTX_SRC_VIF_1_EN BIT(1)
> +#define DPTX_SRC_VIF_0_EN BIT(0)
> +
> +/* TODO turn DPTX_IPCFG fw_mem_clk_en at pm_runtime_suspend. */
> +
> +static int cdns_mhdp_j721e_init(struct cdns_mhdp_device *mhdp)
> +{
> + struct platform_device *pdev = to_platform_device(mhdp->dev);
> +
> + mhdp->j721e_regs = devm_platform_ioremap_resource(pdev, 1);
> + if (IS_ERR(mhdp->j721e_regs))
> + return PTR_ERR(mhdp->j721e_regs);
Use PTR_ERR_OR_ZERO() like this:
return PTR_ERR_OR_ZERO(mhdp->j721e_regs);
> +
> + return 0;
> +}
> +
> +static void cdns_mhdp_j721e_enable(struct cdns_mhdp_device *mhdp)
> +{
> + /*
> + * Eneble VIF_0 and select DPI2 as its input. DSS0 DPI0 is connected
> + * to eDP DPI2. This is the only supported SST configuration on
> + * J721E.
> + */
> + writel(DPTX_SRC_VIF_0_EN | DPTX_SRC_VIF_0_SEL_DPI2,
> + mhdp->j721e_regs + DPTX_SRC_CFG);
> +}
> +
> +static void cdns_mhdp_j721e_disable(struct cdns_mhdp_device *mhdp)
> +{
> + /* Put everything to defaults */
> + writel(0, mhdp->j721e_regs + DPTX_DSC_CFG);
> +}
> +
> +const struct mhdp_platform_ops mhdp_ti_j721e_ops = {
> + .init = cdns_mhdp_j721e_init,
> + .enable = cdns_mhdp_j721e_enable,
> + .disable = cdns_mhdp_j721e_disable,
> +};
> diff --git a/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> new file mode 100644
> index 000000000000..f1ff07b82d32
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/cdns-mhdp-j721e.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * TI j721e Cadence MHDP DP wrapper
> + *
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Jyri Sarha <jsa...@ti.com
> + */
> +
> +#ifndef CDNS_MHDP_J721E_H
> +#define CDNS_MHDP_J721E_H
> +
> +#include <linux/platform_device.h>
> +#include "cdns-mhdp-core.h"
> +
> +struct mhdp_platform_ops;
> +
> +extern const struct mhdp_platform_ops mhdp_ti_j721e_ops;
> +
> +#endif /* !CDNS_MHDP_J721E_H */
> --
> 2.26.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
