On Wed, 2020-07-15 at 16:59 +0200, Thomas Zimmermann wrote:
> This patch adds support for G200 desktop cards. We can reuse the whole
> memory and modesetting code. A few PCI and DAC register values have to
> be updated accordingly.
>
> The most significant change is in the PLL setup. The get the clock limits
> and reference clocks, parses the device's BIOS. With no BIOS found, safe
> defaults are being used.
>
> Signed-off-by: Thomas Zimmermann <tzimmerm...@suse.de>
> Co-developed-by: Egbert Eich <e...@suse.com>
> Signed-off-by: Egbert Eich <e...@suse.com>
> Co-developed-by: Takashi Iwai <ti...@suse.de>
> Signed-off-by: Takashi Iwai <ti...@suse.de>
> ---
> MAINTAINERS | 2 +-
> drivers/gpu/drm/mgag200/Kconfig | 12 +--
> drivers/gpu/drm/mgag200/mgag200_drv.c | 125 ++++++++++++++++++++++++-
> drivers/gpu/drm/mgag200/mgag200_drv.h | 10 ++
> drivers/gpu/drm/mgag200/mgag200_mode.c | 80 ++++++++++++++++
> 5 files changed, 220 insertions(+), 9 deletions(-)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 415954a98934..4c6f96e2b79b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5406,7 +5406,7 @@ S: Orphan / Obsolete
> F: drivers/gpu/drm/mga/
> F: include/uapi/drm/mga_drm.h
>
> -DRM DRIVER FOR MGA G200 SERVER GRAPHICS CHIPS
> +DRM DRIVER FOR MGA G200 GRAPHICS CHIPS
> M: Dave Airlie <airl...@redhat.com>
> S: Odd Fixes
> F: drivers/gpu/drm/mgag200/
> diff --git a/drivers/gpu/drm/mgag200/Kconfig b/drivers/gpu/drm/mgag200/Kconfig
> index 93be766715c9..eec59658a938 100644
> --- a/drivers/gpu/drm/mgag200/Kconfig
> +++ b/drivers/gpu/drm/mgag200/Kconfig
> @@ -1,13 +1,11 @@
> # SPDX-License-Identifier: GPL-2.0-only
> config DRM_MGAG200
> - tristate "Kernel modesetting driver for MGA G200 server engines"
> + tristate "Matrox G200"
> depends on DRM && PCI && MMU
> select DRM_GEM_SHMEM_HELPER
> select DRM_KMS_HELPER
> help
> - This is a KMS driver for the MGA G200 server chips, it
> - does not support the original MGA G200 or any of the desktop
> - chips. It requires 0.3.0 of the modesetting userspace driver,
> - and a version of mga driver that will fail on KMS enabled
> - devices.
> -
> + This is a KMS driver for Matrox G200 chips. It supports the original
> + MGA G200 desktop chips and the server variants. It requires 0.3.0
> + of the modesetting userspace driver, and a version of mga driver
> + that will fail on KMS enabled devices.
> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c
> b/drivers/gpu/drm/mgag200/mgag200_drv.c
> index f7652e16365c..419817d6e2cd 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
> @@ -64,6 +64,14 @@ static int mgag200_regs_init(struct mga_device *mdev)
> u8 crtcext3;
>
> switch (mdev->type) {
> + case G200_PCI:
> + case G200_AGP:
> + if (mgag200_has_sgram(mdev))
> + option = 0x4049cd21;
> + else
> + option = 0x40499121;
> + option2 = 0x00008000;
> + break;
> case G200_SE_A:
> case G200_SE_B:
> if (mgag200_has_sgram(mdev))
> @@ -115,6 +123,117 @@ static int mgag200_regs_init(struct mga_device *mdev)
> return 0;
> }
>
> +static void mgag200_g200_interpret_bios(struct mga_device *mdev,
> + unsigned char __iomem *bios,
> + size_t size)
> +{
> + static const unsigned int expected_length[6] = {
> + 0, 64, 64, 64, 128, 128
> + };
> +
> + struct drm_device *dev = &mdev->base;
> + unsigned char __iomem *pins;
huh, never realized you could write directly to unsigned char __iomem pointers!
> + unsigned int pins_len, version;
> + int offset;
> + int tmp;
> +
> + if (size < MGA_BIOS_OFFSET + 1)
> + return;
> +
> + if (bios[45] != 'M' || bios[46] != 'A' || bios[47] != 'T' ||
> + bios[48] != 'R' || bios[49] != 'O' || bios[50] != 'X')
> + return;
> +
> + offset = (bios[MGA_BIOS_OFFSET + 1] << 8) | bios[MGA_BIOS_OFFSET];
> +
> + if (offset + 5 > size)
> + return;
> +
> + pins = bios + offset;
> + if (pins[0] == 0x2e && pins[1] == 0x41) {
> + version = pins[5];
> + pins_len = pins[2];
> + } else {
> + version = 1;
> + pins_len = pins[0] + (pins[1] << 8);
> + }
> +
> + if (version < 1 || version > 5) {
> + drm_warn(dev, "Unknown BIOS PInS version: %d\n", version);
Did you maybe mean pins or PINS here? or is PInS some weird abbreviation matrox
uses?
> + return;
> + }
> + if (pins_len != expected_length[version]) {
> + drm_warn(dev, "Unexpected BIOS PInS size: %d expeced: %d\n",
> + pins_len, expected_length[version]);
> + return;
> + }
> +
> + if (offset + pins_len > size)
> + return;
> +
> + drm_dbg_kms(dev, "MATROX BIOS PInS version %d size: %d found\n",
> + version, pins_len);
> +
> + switch (version) {
> + case 1:
> + tmp = pins[24] + (pins[25] << 8);
> + if (tmp)
> + mdev->model.g200.pclk_max = tmp * 10;
> + break;
> + case 2:
> + if (pins[41] != 0xff)
> + mdev->model.g200.pclk_max = (pins[41] + 100) * 1000;
> + break;
> + case 3:
> + if (pins[36] != 0xff)
> + mdev->model.g200.pclk_max = (pins[36] + 100) * 1000;
> + if (pins[52] & 0x20)
> + mdev->model.g200.ref_clk = 14318;
> + break;
> + case 4:
> + if (pins[39] != 0xff)
> + mdev->model.g200.pclk_max = pins[39] * 4 * 1000;
> + if (pins[92] & 0x01)
> + mdev->model.g200.ref_clk = 14318;
> + break;
> + case 5:
> + tmp = pins[4] ? 8000 : 6000;
> + if (pins[123] != 0xff)
> + mdev->model.g200.pclk_min = pins[123] * tmp;
> + if (pins[38] != 0xff)
> + mdev->model.g200.pclk_max = pins[38] * tmp;
> + if (pins[110] & 0x01)
> + mdev->model.g200.ref_clk = 14318;
> + break;
> + default:
> + break;
> + }
> +}
> +
> +static void mgag200_g200_init_refclk(struct mga_device *mdev)
> +{
> + struct drm_device *dev = &mdev->base;
> + unsigned char __iomem *bios;
> + size_t size;
> +
> + mdev->model.g200.pclk_min = 50000;
> + mdev->model.g200.pclk_max = 230000;
> + mdev->model.g200.ref_clk = 27050;
> +
> + bios = pci_map_rom(dev->pdev, &size);
> + if (!bios)
> + return;
> +
> + if (size != 0 && bios[0] == 0x55 && bios[1] == 0xaa)
> + mgag200_g200_interpret_bios(mdev, bios, size);
> +
> + pci_unmap_rom(dev->pdev, bios);
> +
> + drm_dbg_kms(dev, "pclk_min: %ld pclk_max: %ld ref_clk: %ld\n",
> + mdev->model.g200.pclk_min, mdev->model.g200.pclk_max,
> + mdev->model.g200.ref_clk);
> +}
> +
> static void mgag200_g200se_init_unique_id(struct mga_device *mdev)
> {
> struct drm_device *dev = &mdev->base;
> @@ -138,7 +257,9 @@ static int mgag200_device_init(struct mga_device *mdev,
> unsigned long flags)
> if (ret)
> return ret;
>
> - if (IS_G200_SE(mdev))
> + if (mdev->type == G200_PCI || mdev->type == G200_AGP)
> + mgag200_g200_init_refclk(mdev);
> + else if (IS_G200_SE(mdev))
> mgag200_g200se_init_unique_id(mdev);
>
> ret = mgag200_mm_init(mdev);
> @@ -182,6 +303,8 @@ mgag200_device_create(struct pci_dev *pdev, unsigned long
> flags)
> */
>
> static const struct pci_device_id mgag200_pciidlist[] = {
> + { PCI_VENDOR_ID_MATROX, 0x520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_PCI },
> + { PCI_VENDOR_ID_MATROX, 0x521, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_AGP },
> { PCI_VENDOR_ID_MATROX, 0x522, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
> G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
> { PCI_VENDOR_ID_MATROX, 0x524, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_B
> },
> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h
> b/drivers/gpu/drm/mgag200/mgag200_drv.h
> index 048efe635aff..54061a61e9ca 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_drv.h
> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
> @@ -38,6 +38,8 @@
> #define RREG32(reg) ioread32(((void __iomem *)mdev->rmmio) + (reg))
> #define WREG32(reg, v) iowrite32(v, ((void __iomem *)mdev->rmmio) + (reg))
>
> +#define MGA_BIOS_OFFSET 0x7ffc
> +
> #define ATTR_INDEX 0x1fc0
> #define ATTR_DATA 0x1fc1
>
> @@ -129,6 +131,8 @@ struct mga_mc {
> };
>
> enum mga_type {
> + G200_PCI,
> + G200_AGP,
> G200_SE_A,
> G200_SE_B,
> G200_WB,
> @@ -167,12 +171,18 @@ struct mga_device {
> int fb_mtrr;
>
> union {
> + struct {
> + long ref_clk;
> + long pclk_min;
> + long pclk_max;
> + } g200;
> struct {
> /* SE model number stored in reg 0x1e24 */
> u32 unique_rev_id;
> } g200se;
> } model;
>
> +
> struct mga_connector connector;
> struct drm_simple_display_pipe display_pipe;
> };
> diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c
> b/drivers/gpu/drm/mgag200/mgag200_mode.c
> index 752409c7f326..bc11552415f5 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_mode.c
> +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
> @@ -108,6 +108,77 @@ static inline void mga_wait_busy(struct mga_device *mdev)
> } while ((status & 0x01) && time_before(jiffies, timeout));
> }
>
> +/*
> + * PLL setup
> + */
> +
> +static int mgag200_g200_set_plls(struct mga_device *mdev, long clock)
> +{
> + struct drm_device *dev = &mdev->base;
> + const int post_div_max = 7;
> + const int in_div_min = 1;
> + const int in_div_max = 6;
> + const int feed_div_min = 7;
> + const int feed_div_max = 127;
> + u8 testm, testn;
> + u8 n = 0, m = 0, p, s;
> + long f_vco;
> + long computed;
> + long delta, tmp_delta;
> + long ref_clk = mdev->model.g200.ref_clk;
> + long p_clk_min = mdev->model.g200.pclk_min;
> + long p_clk_max = mdev->model.g200.pclk_max;
> +
> + if (clock > p_clk_max) {
> + drm_err(dev, "Pixel Clock %ld too high\n", clock);
> + return 1;
> + }
> +
> + if (clock < p_clk_min >> 3)
Looks like there's a stray space after the <. You could also just use max()
here, but I'll leave that up to you
> + clock = p_clk_min >> 3;
> +
> + f_vco = clock;
> + for (p = 0;
> + p <= post_div_max && f_vco < p_clk_min;
> + p = (p << 1) + 1, f_vco <<= 1)
> + ;
> +
> + delta = clock;
> +
> + for (testm = in_div_min; testm <= in_div_max; testm++) {
> + for (testn = feed_div_min; testn <= feed_div_max; testn++) {
> + computed = ref_clk * (testn + 1) / (testm + 1);
> + if (computed < f_vco)
> + tmp_delta = f_vco - computed;
> + else
> + tmp_delta = computed - f_vco;
Another stray space before the =
With those nitpicks addressed, this series is:
Reviewed-by: Lyude Paul <ly...@redhat.com>
> + if (tmp_delta < delta) {
> + delta = tmp_delta;
> + m = testm;
> + n = testn;
> + }
> + }
> + }
> + f_vco = ref_clk * (n + 1) / (m + 1);
> + if (f_vco < 100000)
> + s = 0;
> + else if (f_vco < 140000)
> + s = 1;
> + else if (f_vco < 180000)
> + s = 2;
> + else
> + s = 3;
> +
> + drm_dbg_kms(dev, "clock: %ld vco: %ld m: %d n: %d p: %d s: %d\n",
> + clock, f_vco, m, n, p, s);
> +
> + WREG_DAC(MGA1064_PIX_PLLC_M, m);
> + WREG_DAC(MGA1064_PIX_PLLC_N, n);
> + WREG_DAC(MGA1064_PIX_PLLC_P, (p | (s << 3)));
> +
> + return 0;
> +}
> +
> #define P_ARRAY_SIZE 9
>
> static int mga_g200se_set_plls(struct mga_device *mdev, long clock)
> @@ -717,6 +788,9 @@ static int mgag200_crtc_set_plls(struct mga_device *mdev,
> long clock)
> u8 misc;
>
> switch(mdev->type) {
> + case G200_PCI:
> + case G200_AGP:
> + return mgag200_g200_set_plls(mdev, clock);
> case G200_SE_A:
> case G200_SE_B:
> return mga_g200se_set_plls(mdev, clock);
> @@ -894,6 +968,12 @@ static void mgag200_set_dac_regs(struct mga_device *mdev)
> };
>
> switch (mdev->type) {
> + case G200_PCI:
> + case G200_AGP:
> + dacvalue[MGA1064_SYS_PLL_M] = 0x04;
> + dacvalue[MGA1064_SYS_PLL_N] = 0x2D;
> + dacvalue[MGA1064_SYS_PLL_P] = 0x19;
> + break;
> case G200_SE_A:
> case G200_SE_B:
> dacvalue[MGA1064_VREF_CTL] = 0x03;
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
