Hi Sam,
Thank you for the patch.
On Fri, Jul 03, 2020 at 09:24:15PM +0200, Sam Ravnborg wrote:
> Add the get_modes() bridge operation to prepare for
> use as a chained bridge.
> Add helper function that is also used by the connector.
>
> Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
> Cc: Andrzej Hajda <a.ha...@samsung.com>
> Cc: Neil Armstrong <narmstr...@baylibre.com>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> Cc: Jonas Karlman <jo...@kwiboo.se>
> Cc: Jernej Skrabec <jernej.skra...@siol.net>
> ---
> drivers/gpu/drm/bridge/nxp-ptn3460.c | 52 ++++++++++++++++++----------
> 1 file changed, 33 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c
> b/drivers/gpu/drm/bridge/nxp-ptn3460.c
> index 0bd9f0e451b3..e253c185f94c 100644
> --- a/drivers/gpu/drm/bridge/nxp-ptn3460.c
> +++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
> @@ -154,17 +154,13 @@ static void ptn3460_disable(struct drm_bridge *bridge)
> gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
> }
>
> -static int ptn3460_get_modes(struct drm_connector *connector)
> +static struct edid *ptn3460_get_edid(struct drm_bridge *bridge,
> + struct drm_connector *connector)
> {
> - struct ptn3460_bridge *ptn_bridge;
> - u8 *edid;
> - int ret, num_modes = 0;
> + struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> bool power_off;
> -
> - ptn_bridge = connector_to_ptn3460(connector);
> -
> - if (ptn_bridge->edid)
> - return drm_add_edid_modes(connector, ptn_bridge->edid);
> + u8 *edid;
> + int ret;
>
> power_off = !ptn_bridge->enabled;
> ptn3460_pre_enable(&ptn_bridge->bridge);
> @@ -172,30 +168,46 @@ static int ptn3460_get_modes(struct drm_connector
> *connector)
> edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
> if (!edid) {
> DRM_ERROR("Failed to allocate EDID\n");
> - return 0;
> + return NULL;
Don't you need to power off in the error path ?
> }
>
> ret = ptn3460_read_bytes(ptn_bridge, PTN3460_EDID_ADDR, edid,
> - EDID_LENGTH);
> + EDID_LENGTH);
> if (ret) {
> kfree(edid);
> - goto out;
> + return NULL;
And here too ?
> }
>
> + if (power_off)
> + ptn3460_disable(&ptn_bridge->bridge);
> +
> + kfree(ptn_bridge->edid);
> ptn_bridge->edid = (struct edid *)edid;
> - drm_connector_update_edid_property(connector, ptn_bridge->edid);
>
> - num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
> + return ptn_bridge->edid;
Same comment as earlier in this series about storing the edid.
> +}
>
> -out:
> - if (power_off)
> - ptn3460_disable(&ptn_bridge->bridge);
> +static int ptn3460_connector_get_modes(struct drm_connector *connector)
> +{
> + struct ptn3460_bridge *ptn_bridge;
> + struct edid *edid;
> +
> + ptn_bridge = connector_to_ptn3460(connector);
Maybe
struct ptn3460_bridge *ptn_bridge = connector_to_ptn3460(connector);
?
> +
> + if (ptn_bridge->edid)
> + return drm_add_edid_modes(connector, ptn_bridge->edid);
> +
> + edid = ptn3460_get_edid(&ptn_bridge->bridge, connector);
> + if (!edid)
> + return 0;
> +
> + drm_connector_update_edid_property(connector, edid);
>
> - return num_modes;
> + return drm_add_edid_modes(connector, edid);
> }
>
> static const struct drm_connector_helper_funcs
> ptn3460_connector_helper_funcs = {
> - .get_modes = ptn3460_get_modes,
> + .get_modes = ptn3460_connector_get_modes,
> };
>
> static const struct drm_connector_funcs ptn3460_connector_funcs = {
> @@ -249,6 +261,7 @@ static const struct drm_bridge_funcs ptn3460_bridge_funcs
> = {
> .pre_enable = ptn3460_pre_enable,
> .disable = ptn3460_disable,
> .attach = ptn3460_bridge_attach,
> + .get_edid = ptn3460_get_edid,
> };
>
> static int ptn3460_probe(struct i2c_client *client,
> @@ -304,6 +317,7 @@ static int ptn3460_probe(struct i2c_client *client,
> }
>
> ptn_bridge->bridge.funcs = &ptn3460_bridge_funcs;
> + ptn_bridge->bridge.ops = DRM_BRIDGE_OP_EDID;
> ptn_bridge->bridge.of_node = dev->of_node;
> drm_bridge_add(&ptn_bridge->bridge);
>
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
