On Sat, Jun 20, 2020 at 02:17:54PM +0200, Hans de Goede wrote:
> Implement the pwm_ops.get_state() method to complete the support for the
> new atomic PWM API.
>
> Reviewed-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> ---
> Changes in v3:
> - Add Andy's Reviewed-by tag
> - Remove extra whitespace to align some code after assignments (requested by
> Uwe Kleine-König)
> ---
> drivers/pwm/pwm-crc.c | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
> index 8a7f4707279c..b311354d40a3 100644
> --- a/drivers/pwm/pwm-crc.c
> +++ b/drivers/pwm/pwm-crc.c
> @@ -119,8 +119,37 @@ static int crc_pwm_apply(struct pwm_chip *chip, struct
> pwm_device *pwm,
> return 0;
> }
>
> +static void crc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> + struct pwm_state *state)
> +{
> + struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
> + struct device *dev = crc_pwm->chip.dev;
> + unsigned int clk_div, clk_div_reg, duty_cycle_reg;
> + int error;
> +
> + error = regmap_read(crc_pwm->regmap, PWM0_CLK_DIV, &clk_div_reg);
> + if (error) {
> + dev_err(dev, "Error reading PWM0_CLK_DIV %d\n", error);
> + return;
> + }
> +
> + error = regmap_read(crc_pwm->regmap, PWM0_DUTY_CYCLE, &duty_cycle_reg);
> + if (error) {
> + dev_err(dev, "Error reading PWM0_DUTY_CYCLE %d\n", error);
> + return;
> + }
> +
> + clk_div = (clk_div_reg & ~PWM_OUTPUT_ENABLE) + 1;
> +
> + state->period = clk_div * NSEC_PER_USEC * 256 / PWM_BASE_CLK_MHZ;
> + state->duty_cycle = duty_cycle_reg * state->period / PWM_MAX_LEVEL;Please round up here. > + state->polarity = PWM_POLARITY_NORMAL; > + state->enabled = !!(clk_div_reg & PWM_OUTPUT_ENABLE); > +} > + Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
