add write_s_mask function in cmdq helper functions which
writes value contains in internal register to address
with mask and large dma access support.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hs...@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 23 +++++++++++++++++++++++
include/linux/mailbox/mtk-cmdq-mailbox.h | 1 +
include/linux/soc/mediatek/mtk-cmdq.h | 19 ++++++++++++++++++-
3 files changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c
b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ee24c0ec0a24..58a414790471 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -241,6 +241,29 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16
high_addr_reg_idx,
}
EXPORT_SYMBOL(cmdq_pkt_write_s);
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask)
+{
+ struct cmdq_instruction inst = { {0} };
+ int err;
+
+ inst.op = CMDQ_CODE_MASK;
+ inst.mask = ~mask;
+ err = cmdq_pkt_append_command(pkt, inst);
+ if (err < 0)
+ return err;
+
+ inst.mask = 0;
+ inst.op = CMDQ_CODE_WRITE_S_MASK;
+ inst.src_t = CMDQ_REG_TYPE;
+ inst.sop = high_addr_reg_idx;
+ inst.offset = addr_low;
+ inst.src_reg = src_reg_idx;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask);
+
int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
{
struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h
b/include/linux/mailbox/mtk-cmdq-mailbox.h
index ee67dd3b86f5..8ef87e1bd03b 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -60,6 +60,7 @@ enum cmdq_code {
CMDQ_CODE_WFE = 0x20,
CMDQ_CODE_EOC = 0x40,
CMDQ_CODE_WRITE_S = 0x90,
+ CMDQ_CODE_WRITE_S_MASK = 0x91,
CMDQ_CODE_LOGIC = 0xa0,
};
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h
b/include/linux/soc/mediatek/mtk-cmdq.h
index d623f1aa7814..ca9c75fd8125 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -110,7 +110,6 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
* @high_addr_reg_idx: internal register ID which contains high address of pa
* @addr_low: low address of pa
* @src_reg_idx: the CMDQ internal register ID which cache source value
- * @mask: the specified target address mask, use U32_MAX if no need
*
* Return: 0 for success; else the error code is returned
*
@@ -122,6 +121,24 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
u16 addr_low, u16 src_reg_idx);
+/**
+ * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ
packet
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @addr_low: low address of pa
+ * @src_reg_idx: the CMDQ internal register ID which cache source value
+ * @mask: the specified target address mask, use U32_MAX if no need
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+ u16 addr_low, u16 src_reg_idx, u32 mask);
+
/**
* cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
* @pkt: the CMDQ packet
--
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
