On 08/03/2020 11:52, Dennis YC Hsieh wrote:
> add write_s function in cmdq helper functions which
> writes a constant value to address with large dma
> access support.
>
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hs...@mediatek.com>
> Reviewed-by: CK Hu <ck...@mediatek.com>
> ---
> drivers/soc/mediatek/mtk-cmdq-helper.c | 26 ++++++++++++++++++++++++++
> include/linux/soc/mediatek/mtk-cmdq.h | 14 ++++++++++++++
> 2 files changed, 40 insertions(+)
>
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c
> b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 03c129230cd7..a9ebbabb7439 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -269,6 +269,32 @@ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16
> high_addr_reg_idx,
> }
> EXPORT_SYMBOL(cmdq_pkt_write_s);
>
> +int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> + u16 addr_low, u32 value, u32 mask)
> +{
> + struct cmdq_instruction inst = { {0} };
> + int err;
> +
> + if (mask != U32_MAX) {
> + inst.op = CMDQ_CODE_MASK;
> + inst.mask = ~mask;
> + err = cmdq_pkt_append_command(pkt, inst);
> + if (err < 0)
> + return err;
> +
> + inst.op = CMDQ_CODE_WRITE_S_MASK;
> + } else {
> + inst.op = CMDQ_CODE_WRITE_S;
> + }
> +
> + inst.sop = high_addr_reg_idx;
Writing u16 value in a 5 bit wide variable?
> + inst.offset = addr_low;
> + inst.value = value;
> +
> + return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_s_value);
> +
> int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> {
> struct cmdq_instruction inst = { {0} };
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h
> b/include/linux/soc/mediatek/mtk-cmdq.h
> index 01b4184af310..fec292aac83c 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -135,6 +135,20 @@ int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16
> high_addr_reg_idx, u16 addr_low,
> int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> u16 addr_low, u16 src_reg_idx, u32 mask);
>
> +/**
> + * cmdq_pkt_write_s_value() - append write_s command with mask to the CMDQ
> + * packet which write value to a physical address
> + * @pkt: the CMDQ packet
> + * @high_addr_reg_idx: internal regisger ID which contains high
> address of pa
register
> + * @addr_low: low address of pa
> + * @value: the specified target value
> + * @mask: the specified target mask
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> + u16 addr_low, u32 value, u32 mask);
> +
> /**
> * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
> * @pkt: the CMDQ packet
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
