On Tue, 12 May 2020 10:02:12 +0200 Hans de Goede <hdego...@redhat.com> wrote:
> Hi,
>
> On 5/12/20 9:49 AM, Pekka Paalanen wrote:
> > On Mon, 11 May 2020 19:47:24 +0200
> > Hans de Goede <hdego...@redhat.com> wrote:
> >
> >> From: Rajat Jain <raja...@google.com>
> >>
> >> Add support for generic electronic privacy screen properties, that
> >> can be added by systems that have an integrated EPS.
> >>
> >> Changes in v2 (Hans de Goede)
> >> - Create 2 properties, "privacy-screen sw-state" and
> >> "privacy-screen hw-state", to deal with devices where the OS might be
> >> locked out of making state changes
> >> - Write kerneldoc explaining how the 2 properties work together, what
> >> happens when changes to the state are made outside of the DRM code's
> >> control, etc.
> >>
> >> Signed-off-by: Rajat Jain <raja...@google.com>
> >> Co-authored-by: Hans de Goede <hdego...@redhat.com>
> >> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> >> ---
> >> Documentation/gpu/drm-kms.rst | 2 +
> >> drivers/gpu/drm/drm_atomic_uapi.c | 6 ++
> >> drivers/gpu/drm/drm_connector.c | 100 ++++++++++++++++++++++++++++++
> >> include/drm/drm_connector.h | 50 +++++++++++++++
> >> 4 files changed, 158 insertions(+)
> >
> > ...
> >
> >> diff --git a/drivers/gpu/drm/drm_connector.c
> >> b/drivers/gpu/drm/drm_connector.c
> >> index 644f0ad10671..01360edc2376 100644
> >> --- a/drivers/gpu/drm/drm_connector.c
> >> +++ b/drivers/gpu/drm/drm_connector.c
> >> @@ -1186,6 +1186,45 @@ static const struct drm_prop_enum_list
> >> dp_colorspaces[] = {
> >> * can also expose this property to external outputs, in which
> >> case they
> >> * must support "None", which should be the default (since
> >> external screens
> >> * have a built-in scaler).
> >> + *
> >> + * privacy-screen sw-state, privacy-screen hw-state:
> >> + * These 2 optional properties can be used to query the state of
> >> the
> >> + * electronic privacy screen that is available on some displays;
> >> and in
> >> + * some cases also control the state. If a driver implements these
> >> + * properties then both properties must be present.
> >> + *
> >> + * "privacy-screen hw-state" is read-only and reflects the actual
> >> state
> >> + * of the privacy-screen, possible values: "Enabled", "Disabled,
> >> + * "Enabled, locked", "Disabled, locked". The locked states
> >> indicate
> >> + * that the state cannot be changed through the DRM API. E.g. there
> >> + * might be devices where the firmware-setup options, or a hardware
> >> + * slider-switch, offer always on / off modes.
> >> + *
> >> + * "privacy-screen sw-state" can be set to change the
> >> privacy-screen state
> >> + * when not locked. In this case the driver must update the
> >> hw-state
> >> + * property to reflect the new state on completion of the commit
> >> of the
> >> + * sw-state property. Setting the sw-state property when the
> >> hw-state is
> >> + * locked must be interpreted by the driver as a request to change
> >> the
> >> + * state to the set state when the hw-state becomes unlocked. E.g.
> >> if
> >> + * "privacy-screen hw-state" is "Enabled, locked" and the sw-state
> >> + * gets set to "Disabled" followed by the user unlocking the state
> >> by
> >> + * changing the slider-switch position, then the driver must set
> >> the
> >> + * state to "Disabled" upon receiving the unlock event.
> >> + *
> >> + * In some cases the privacy-screen state might change outside of
> >> control
> >> + * of the DRM code. E.g. there might be a firmware handled hotkey
> >> which
> >> + * toggles the state, or the state might be changed through
> >> another
> >
> > Hi,
> >
> > in the above three lines, I'd use the term "hardware state" instead of
> > just "state" to be explicit. Or should it be "physical state" since
> > "hardware state" might be confused with "hw-state" property state?
>
> Maybe "actual state"? That is what is used a few lines higher:
>
> '"privacy-screen hw-state" is read-only and reflects the actual state'
>
> And you use it yourself to describe what we want below:
>
> > I don't mind as long as it's unambiguous and distinguishes explicitly
> > between actual and the two property states.
>
> So since you and I both naturally described it as "actual state" without
> thinking too much what we where writing at the time (I guess that applies
> to your use too), "actual state" seems a good fit ?
Sure!
Thanks,
pq
pgpua1KDkCdrY.pgp
Description: OpenPGP digital signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
