On Tue, Apr 21, 2020 at 02:54:12PM +0200, Daniel Vetter wrote: > On Tue, Mar 24, 2020 at 04:19:31PM +0100, Lubomir Rintel wrote: > > This is a driver for video encoder with VGA and DVI/HDMI outputs. > > > > There is no documentation for the chip -- the operation was guessed from > > what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names > > come from the ch7035 driver in Mediatek's GPL code dump. > > > > Only bare minimum is implemented -- no fancy stuff, such as scaling. That > > would only worsen our misery. We don't load the firmware and we don't need > > to even bother enabling the MCU. There are probably no distributable > > firmware images anyway. > > > > Just like the tda998x driver, this one uses the component framework and > > adds an encoder on component bind, so that it works with the Armada DRM > > driver.
Thank you for your response. > Uh, can we instead pls land the patches for armada to switch over to of > bridge helpers. I honestly don't know -- it's not something I can do anything about. I didn't have any luck getting responses to my other patches for the Armada driver. > Iirc the big hold-up was that with direct bridge usage > instead of component framework, the drm driver wouldn't unload. But core > pm maintainers fixed device links to include driver unloading, and there > was a drm_bridge patch including armada patches to do all that. > > But somehow it didn't land. Iirc because Russell couldn't test them on > upstream somehow. This is what I've found [1]. It seems to include the device links work and switches over the komeda driver, not armada, from components to drm_bridge: [1] https://patchwork.kernel.org/cover/11262351/ I'm wondering if this is the patch set you're referring to? > Adding more special cases and bridge drivers that we have to convert isn't > going to make this any easier. No conversion would be necessary -- merely stripping the component/encoder parts once they're no longer necessary. The driver would still work just fine with drivers that don't utilize the component framework, juts as tda998x does. > This entire discussion happened in > > https://www.spinics.net/lists/dri-devel/msg201927.html > > Can't find the armada patches real quick, nor the drm_bridge patch. But > the core infrastructure hides behind. The core pm change has been added in > > commit e7dd40105aac9ba051e44ad711123bc53a5e4c71 > Author: Rafael J. Wysocki <rafael.j.wyso...@intel.com> > Date: Fri Feb 1 01:59:42 2019 +0100 > > driver core: Add device link flag DL_FLAG_AUTOPROBE_CONSUMER Thank you Lubo > > Thanks, Daniel > > > > Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, > > with VGA as well as DVI. > > > > Signed-off-by: Lubomir Rintel <lkund...@v3.sk> > > > > --- > > Changes since v3: > > - Cosmetic changes; drop ch7033_encoder_destroy() and use > > drm_encoder_cleanup() for drm_encoder_funcs.destroy callback > > directly. > > > > Changes since v1: > > - Sort the includes > > - Drop a useless model id read > > - Chain to the bridge-connector instead of dealing with the HPD/EDID > > readout machinery ourselves > > - Utilize regmap to access the registers > > > > drivers/gpu/drm/bridge/Kconfig | 10 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/chrontel-ch7033.c | 669 +++++++++++++++++++++++ > > 3 files changed, 680 insertions(+) > > create mode 100644 drivers/gpu/drm/bridge/chrontel-ch7033.c > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > index aaed2347ace9d..0ebc72d62a5b2 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -27,6 +27,16 @@ config DRM_CDNS_DSI > > Support Cadence DPI to DSI bridge. This is an internal > > bridge and is meant to be directly embedded in a SoC. > > > > +config DRM_CHRONTEL_CH7033 > > + tristate "Chrontel CH7033 Video Encoder" > > + depends on OF > > + select DRM_KMS_HELPER > > + help > > + Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as > > + found in the Dell Wyse 3020 thin client. > > + > > + If in doubt, say "N". > > + > > config DRM_DISPLAY_CONNECTOR > > tristate "Display connector support" > > depends on OF > > diff --git a/drivers/gpu/drm/bridge/Makefile > > b/drivers/gpu/drm/bridge/Makefile > > index 6fb062b5b0f04..a844315feddb4 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0 > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > +obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > > obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += > > megachips-stdpxxxx-ge-b850v3-fw.o > > diff --git a/drivers/gpu/drm/bridge/chrontel-ch7033.c > > b/drivers/gpu/drm/bridge/chrontel-ch7033.c > > new file mode 100644 > > index 0000000000000..f5cb2130684f7 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/chrontel-ch7033.c > > @@ -0,0 +1,669 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Chrontel CH7033 Video Encoder Driver > > + * > > + * Copyright (C) 2019,2020 Lubomir Rintel > > + */ > > + > > +#include <linux/component.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/module.h> > > +#include <linux/regmap.h> > > + > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_bridge.h> > > +#include <drm/drm_edid.h> > > +#include <drm/drm_of.h> > > +#include <drm/drm_print.h> > > +#include <drm/drm_probe_helper.h> > > + > > +/* Page 0, Register 0x07 */ > > +enum { > > + DRI_PD = BIT(3), > > + IO_PD = BIT(5), > > +}; > > + > > +/* Page 0, Register 0x08 */ > > +enum { > > + DRI_PDDRI = GENMASK(7, 4), > > + PDDAC = GENMASK(3, 1), > > + PANEN = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x09 */ > > +enum { > > + DPD = BIT(7), > > + GCKOFF = BIT(6), > > + TV_BP = BIT(5), > > + SCLPD = BIT(4), > > + SDPD = BIT(3), > > + VGA_PD = BIT(2), > > + HDBKPD = BIT(1), > > + HDMI_PD = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x0a */ > > +enum { > > + MEMINIT = BIT(7), > > + MEMIDLE = BIT(6), > > + MEMPD = BIT(5), > > + STOP = BIT(4), > > + LVDS_PD = BIT(3), > > + HD_DVIB = BIT(2), > > + HDCP_PD = BIT(1), > > + MCU_PD = BIT(0), > > +}; > > + > > +/* Page 0, Register 0x18 */ > > +enum { > > + IDF = GENMASK(7, 4), > > + INTEN = BIT(3), > > + SWAP = GENMASK(2, 0), > > +}; > > + > > +enum { > > + BYTE_SWAP_RGB = 0, > > + BYTE_SWAP_RBG = 1, > > + BYTE_SWAP_GRB = 2, > > + BYTE_SWAP_GBR = 3, > > + BYTE_SWAP_BRG = 4, > > + BYTE_SWAP_BGR = 5, > > +}; > > + > > +/* Page 0, Register 0x19 */ > > +enum { > > + HPO_I = BIT(5), > > + VPO_I = BIT(4), > > + DEPO_I = BIT(3), > > + CRYS_EN = BIT(2), > > + GCLKFREQ = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x2e */ > > +enum { > > + HFLIP = BIT(7), > > + VFLIP = BIT(6), > > + DEPO_O = BIT(5), > > + HPO_O = BIT(4), > > + VPO_O = BIT(3), > > + TE = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x2b */ > > +enum { > > + SWAPS = GENMASK(7, 4), > > + VFMT = GENMASK(3, 0), > > +}; > > + > > +/* Page 0, Register 0x54 */ > > +enum { > > + COMP_BP = BIT(7), > > + DAC_EN_T = BIT(6), > > + HWO_HDMI_HI = GENMASK(5, 3), > > + HOO_HDMI_HI = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x57 */ > > +enum { > > + FLDSEN = BIT(7), > > + VWO_HDMI_HI = GENMASK(5, 3), > > + VOO_HDMI_HI = GENMASK(2, 0), > > +}; > > + > > +/* Page 0, Register 0x7e */ > > +enum { > > + HDMI_LVDS_SEL = BIT(7), > > + DE_GEN = BIT(6), > > + PWM_INDEX_HI = BIT(5), > > + USE_DE = BIT(4), > > + R_INT = GENMASK(3, 0), > > +}; > > + > > +/* Page 1, Register 0x07 */ > > +enum { > > + BPCKSEL = BIT(7), > > + DRI_CMFB_EN = BIT(6), > > + CEC_PUEN = BIT(5), > > + CEC_T = BIT(3), > > + CKINV = BIT(2), > > + CK_TVINV = BIT(1), > > + DRI_CKS2 = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x08 */ > > +enum { > > + DACG = BIT(6), > > + DACKTST = BIT(5), > > + DEDGEB = BIT(4), > > + SYO = BIT(3), > > + DRI_IT_LVDS = GENMASK(2, 1), > > + DISPON = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x0c */ > > +enum { > > + DRI_PLL_CP = GENMASK(7, 6), > > + DRI_PLL_DIVSEL = BIT(5), > > + DRI_PLL_N1_1 = BIT(4), > > + DRI_PLL_N1_0 = BIT(3), > > + DRI_PLL_N3_1 = BIT(2), > > + DRI_PLL_N3_0 = BIT(1), > > + DRI_PLL_CKTSTEN = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x6b */ > > +enum { > > + VCO3CS = GENMASK(7, 6), > > + ICPGBK2_0 = GENMASK(5, 3), > > + DRI_VCO357SC = BIT(2), > > + PDPLL2 = BIT(1), > > + DRI_PD_SER = BIT(0), > > +}; > > + > > +/* Page 1, Register 0x6c */ > > +enum { > > + PLL2N11 = GENMASK(7, 4), > > + PLL2N5_4 = BIT(3), > > + PLL2N5_TOP = BIT(2), > > + DRI_PLL_PD = BIT(1), > > + PD_I2CM = BIT(0), > > +}; > > + > > +/* Page 3, Register 0x28 */ > > +enum { > > + DIFF_EN = GENMASK(7, 6), > > + CORREC_EN = GENMASK(5, 4), > > + VGACLK_BP = BIT(3), > > + HM_LV_SEL = BIT(2), > > + HD_VGA_SEL = BIT(1), > > +}; > > + > > +/* Page 3, Register 0x2a */ > > +enum { > > + LVDSCLK_BP = BIT(7), > > + HDTVCLK_BP = BIT(6), > > + HDMICLK_BP = BIT(5), > > + HDTV_BP = BIT(4), > > + HDMI_BP = BIT(3), > > + THRWL = GENMASK(2, 0), > > +}; > > + > > +/* Page 4, Register 0x52 */ > > +enum { > > + PGM_ARSTB = BIT(7), > > + MCU_ARSTB = BIT(6), > > + MCU_RETB = BIT(2), > > + RESETIB = BIT(1), > > + RESETDB = BIT(0), > > +}; > > + > > +struct ch7033_priv { > > + struct regmap *regmap; > > + struct drm_bridge *next_bridge; > > + struct drm_encoder encoder; > > + struct drm_bridge bridge; > > + struct drm_connector connector; > > +}; > > + > > +#define conn_to_ch7033_priv(x) \ > > + container_of(x, struct ch7033_priv, connector) > > +#define bridge_to_ch7033_priv(x) \ > > + container_of(x, struct ch7033_priv, bridge) > > + > > + > > +static enum drm_connector_status ch7033_connector_detect( > > + struct drm_connector *connector, bool force) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + > > + return drm_bridge_detect(priv->next_bridge); > > +} > > + > > +static const struct drm_connector_funcs ch7033_connector_funcs = { > > + .reset = drm_atomic_helper_connector_reset, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .detect = ch7033_connector_detect, > > + .destroy = drm_connector_cleanup, > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +static int ch7033_connector_get_modes(struct drm_connector *connector) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + struct edid *edid; > > + int ret; > > + > > + edid = drm_bridge_get_edid(priv->next_bridge, connector); > > + drm_connector_update_edid_property(connector, edid); > > + if (edid) { > > + ret = drm_add_edid_modes(connector, edid); > > + kfree(edid); > > + } else { > > + ret = drm_add_modes_noedid(connector, 1920, 1080); > > + drm_set_preferred_mode(connector, 1024, 768); > > + } > > + > > + return ret; > > +} > > + > > +static struct drm_encoder *ch7033_connector_best_encoder( > > + struct drm_connector *connector) > > +{ > > + struct ch7033_priv *priv = conn_to_ch7033_priv(connector); > > + > > + return priv->bridge.encoder; > > +} > > + > > +static const struct drm_connector_helper_funcs > > ch7033_connector_helper_funcs = { > > + .get_modes = ch7033_connector_get_modes, > > + .best_encoder = ch7033_connector_best_encoder, > > +}; > > + > > +static void ch7033_hpd_event(void *arg, enum drm_connector_status status) > > +{ > > + struct ch7033_priv *priv = arg; > > + > > + if (priv->bridge.dev) > > + drm_helper_hpd_irq_event(priv->connector.dev); > > +} > > + > > +static int ch7033_bridge_attach(struct drm_bridge *bridge, > > + enum drm_bridge_attach_flags flags) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + struct drm_connector *connector = &priv->connector; > > + int ret; > > + > > + ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge, > > + DRM_BRIDGE_ATTACH_NO_CONNECTOR); > > + if (ret) > > + return ret; > > + > > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > > + return 0; > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) { > > + connector->polled = DRM_CONNECTOR_POLL_HPD; > > + } else { > > + connector->polled = DRM_CONNECTOR_POLL_CONNECT | > > + DRM_CONNECTOR_POLL_DISCONNECT; > > + } > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) { > > + drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event, > > + priv); > > + } > > + > > + drm_connector_helper_add(connector, > > + &ch7033_connector_helper_funcs); > > + ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector, > > + &ch7033_connector_funcs, > > + priv->next_bridge->type, > > + priv->next_bridge->ddc); > > + if (ret) { > > + DRM_ERROR("Failed to initialize connector\n"); > > + return ret; > > + } > > + > > + return drm_connector_attach_encoder(&priv->connector, bridge->encoder); > > +} > > + > > +static void ch7033_bridge_detach(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) > > + drm_bridge_hpd_disable(priv->next_bridge); > > + drm_connector_cleanup(&priv->connector); > > +} > > + > > +static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge > > *bridge, > > + const struct drm_display_mode *mode) > > +{ > > + if (mode->clock > 165000) > > + return MODE_CLOCK_HIGH; > > + if (mode->hdisplay >= 1920) > > + return MODE_BAD_HVALUE; > > + if (mode->vdisplay >= 1080) > > + return MODE_BAD_VVALUE; > > + return MODE_OK; > > +} > > + > > +static void ch7033_bridge_disable(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00); > > +} > > + > > +static void ch7033_bridge_enable(struct drm_bridge *bridge) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB); > > +} > > + > > +static void ch7033_bridge_mode_set(struct drm_bridge *bridge, > > + const struct drm_display_mode *mode, > > + const struct drm_display_mode *adjusted_mode) > > +{ > > + struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge); > > + int hbporch = mode->hsync_start - mode->hdisplay; > > + int hsynclen = mode->hsync_end - mode->hsync_start; > > + int vbporch = mode->vsync_start - mode->vdisplay; > > + int vsynclen = mode->vsync_end - mode->vsync_start; > > + > > + /* > > + * Page 4 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x04); > > + > > + /* Turn everything off to set all the registers to their defaults. */ > > + regmap_write(priv->regmap, 0x52, 0x00); > > + /* Bring I/O block up. */ > > + regmap_write(priv->regmap, 0x52, RESETIB); > > + > > + /* > > + * Page 0 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x00); > > + > > + /* Bring up parts we need from the power down. */ > > + regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0); > > + regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0); > > + regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF | > > + HDMI_PD | VGA_PD, 0); > > + regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0); > > + > > + /* Horizontal input timing. */ > > + regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 | > > + (mode->hdisplay >> 8)); > > + regmap_write(priv->regmap, 0x0c, mode->hdisplay); > > + regmap_write(priv->regmap, 0x0d, mode->htotal); > > + regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 | > > + (hbporch >> 8)); > > + regmap_write(priv->regmap, 0x0f, hbporch); > > + regmap_write(priv->regmap, 0x10, hsynclen); > > + > > + /* Vertical input timing. */ > > + regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 | > > + (mode->vdisplay >> 8)); > > + regmap_write(priv->regmap, 0x12, mode->vdisplay); > > + regmap_write(priv->regmap, 0x13, mode->vtotal); > > + regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) | > > + (vbporch >> 8)); > > + regmap_write(priv->regmap, 0x15, vbporch); > > + regmap_write(priv->regmap, 0x16, vsynclen); > > + > > + /* Input color swap. */ > > + regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR); > > + > > + /* Input clock and sync polarity. */ > > + regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16); > > + regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ, > > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 | > > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 | > > + mode->clock >> 16); > > + regmap_write(priv->regmap, 0x1a, mode->clock >> 8); > > + regmap_write(priv->regmap, 0x1b, mode->clock); > > + > > + /* Horizontal output timing. */ > > + regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 | > > + (mode->hdisplay >> 8)); > > + regmap_write(priv->regmap, 0x20, mode->hdisplay); > > + regmap_write(priv->regmap, 0x21, mode->htotal); > > + > > + /* Vertical output timing. */ > > + regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 | > > + (mode->vdisplay >> 8)); > > + regmap_write(priv->regmap, 0x26, mode->vdisplay); > > + regmap_write(priv->regmap, 0x27, mode->vtotal); > > + > > + /* VGA channel bypass */ > > + regmap_update_bits(priv->regmap, 0x2b, VFMT, 9); > > + > > + /* Output sync polarity. */ > > + regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O, > > + (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 | > > + (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0); > > + > > + /* HDMI horizontal output timing. */ > > + regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI, > > + (hsynclen >> 8) << 3 | > > + (hbporch >> 8)); > > + regmap_write(priv->regmap, 0x55, hbporch); > > + regmap_write(priv->regmap, 0x56, hsynclen); > > + > > + /* HDMI vertical output timing. */ > > + regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI, > > + (vsynclen >> 8) << 3 | > > + (vbporch >> 8)); > > + regmap_write(priv->regmap, 0x58, vbporch); > > + regmap_write(priv->regmap, 0x59, vsynclen); > > + > > + /* Pick HDMI, not LVDS. */ > > + regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL); > > + > > + /* > > + * Page 1 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x01); > > + > > + /* No idea what these do, but VGA is wobbly and blinky without them. */ > > + regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV); > > + regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON); > > + > > + /* DRI PLL */ > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL); > > + if (mode->clock <= 40000) { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + 0); > > + } else if (mode->clock < 80000) { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + DRI_PLL_N3_0 | > > + DRI_PLL_N1_0); > > + } else { > > + regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 | > > + DRI_PLL_N1_0 | > > + DRI_PLL_N3_1 | > > + DRI_PLL_N3_0, > > + DRI_PLL_N3_1 | > > + DRI_PLL_N1_1); > > + } > > + > > + /* This seems to be color calibration for VGA. */ > > + regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */ > > + regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */ > > + regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */ > > + regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */ > > + regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */ > > + regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */ > > + > > + regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00); > > + regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00); > > + > > + /* > > + * Page 3 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x03); > > + > > + /* More bypasses and apparently another HDMI/LVDS selector. */ > > + regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL, > > + VGACLK_BP | HM_LV_SEL); > > + regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP, > > + HDMICLK_BP | HDMI_BP); > > + > > + /* > > + * Page 4 > > + */ > > + regmap_write(priv->regmap, 0x03, 0x04); > > + > > + /* Output clock. */ > > + regmap_write(priv->regmap, 0x10, mode->clock >> 16); > > + regmap_write(priv->regmap, 0x11, mode->clock >> 8); > > + regmap_write(priv->regmap, 0x12, mode->clock); > > +} > > + > > +static const struct drm_bridge_funcs ch7033_bridge_funcs = { > > + .attach = ch7033_bridge_attach, > > + .detach = ch7033_bridge_detach, > > + .mode_valid = ch7033_bridge_mode_valid, > > + .disable = ch7033_bridge_disable, > > + .enable = ch7033_bridge_enable, > > + .mode_set = ch7033_bridge_mode_set, > > +}; > > + > > +static const struct drm_encoder_funcs ch7033_encoder_funcs = { > > + .destroy = drm_encoder_cleanup, > > +}; > > + > > +static int ch7033_bind(struct device *dev, struct device *master, > > + void *data) > > +{ > > + struct drm_device *drm = data; > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + uint32_t crtcs; > > + int ret; > > + > > + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node); > > + priv->encoder.possible_crtcs = crtcs; > > + > > + ret = drm_encoder_init(drm, &priv->encoder, &ch7033_encoder_funcs, > > + DRM_MODE_ENCODER_TMDS, NULL); > > + if (ret) > > + return ret; > > + > > + ret = drm_bridge_attach(&priv->encoder, &priv->bridge, NULL, 0); > > + if (ret) > > + drm_encoder_cleanup(&priv->encoder); > > + > > + return ret; > > +} > > + > > +static void ch7033_unbind(struct device *dev, struct device *master, > > + void *data) > > +{ > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + > > + drm_encoder_cleanup(&priv->encoder); > > +} > > + > > +static const struct regmap_config ch7033_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > + .max_register = 0x7f, > > +}; > > + > > +static const struct component_ops ch7033_ops = { > > + .bind = ch7033_bind, > > + .unbind = ch7033_unbind, > > +}; > > + > > +static int ch7033_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct device *dev = &client->dev; > > + struct ch7033_priv *priv; > > + unsigned int val; > > + int ret; > > + > > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + > > + dev_set_drvdata(dev, priv); > > + > > + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL, > > + &priv->next_bridge); > > + if (ret) > > + return ret; > > + > > + priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config); > > + if (IS_ERR(priv->regmap)) { > > + dev_err(&client->dev, "regmap init failed\n"); > > + return PTR_ERR(priv->regmap); > > + } > > + > > + ret = regmap_read(priv->regmap, 0x00, &val); > > + if (ret < 0) { > > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > > + return ret; > > + } > > + if ((val & 0xf7) != 0x56) { > > + dev_err(&client->dev, "the device is not a ch7033\n"); > > + return -ENODEV; > > + } > > + > > + regmap_write(priv->regmap, 0x03, 0x04); > > + ret = regmap_read(priv->regmap, 0x51, &val); > > + if (ret < 0) { > > + dev_err(&client->dev, "error reading the model id: %d\n", ret); > > + return ret; > > + } > > + if ((val & 0x0f) != 3) { > > + dev_err(&client->dev, "unknown revision %u\n", val); > > + return -ENODEV; > > + } > > + > > + INIT_LIST_HEAD(&priv->bridge.list); > > + priv->bridge.funcs = &ch7033_bridge_funcs; > > + priv->bridge.of_node = dev->of_node; > > + drm_bridge_add(&priv->bridge); > > + > > + ret = component_add(dev, &ch7033_ops); > > + if (ret) { > > + drm_bridge_remove(&priv->bridge); > > + return ret; > > + } > > + > > + dev_info(dev, "Chrontel CH7033 Video Encoder\n"); > > + return 0; > > +} > > + > > +static int ch7033_remove(struct i2c_client *client) > > +{ > > + struct device *dev = &client->dev; > > + struct ch7033_priv *priv = dev_get_drvdata(dev); > > + > > + component_del(dev, &ch7033_ops); > > + drm_bridge_remove(&priv->bridge); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id ch7033_dt_ids[] = { > > + { .compatible = "chrontel,ch7033", }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, ch7033_dt_ids); > > + > > +static const struct i2c_device_id ch7033_ids[] = { > > + { "ch7033", 0 }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, ch7033_ids); > > + > > +static struct i2c_driver ch7033_driver = { > > + .probe = ch7033_probe, > > + .remove = ch7033_remove, > > + .driver = { > > + .name = "ch7033", > > + .of_match_table = of_match_ptr(ch7033_dt_ids), > > + }, > > + .id_table = ch7033_ids, > > +}; > > + > > +module_i2c_driver(ch7033_driver); > > + > > +MODULE_AUTHOR("Lubomir Rintel <lkund...@v3.sk>"); > > +MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.26.0.rc2 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
