On Wed, Apr 08, 2020 at 09:50:42PM +0200, Sam Ravnborg wrote:
> As the binding matches panel-simple, added the compatible to the
> panel-simple list.
> With this change enable-gpios is now optional.

But is a DSI panel, so it should be in panel-simple-dsi.yaml.

> 
> Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
> Cc: Chris Zhong <z...@rock-chips.com>
> Cc: Thierry Reding <thierry.red...@gmail.com>
> Cc: Sam Ravnborg <s...@ravnborg.org>
> ---
>  .../display/panel/innolux,p079zca.txt         | 22 -------------------
>  .../bindings/display/panel/panel-simple.yaml  |  2 ++
>  2 files changed, 2 insertions(+), 22 deletions(-)
>  delete mode 100644 
> Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> 
> diff --git 
> a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt 
> b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> deleted file mode 100644
> index 3ab8c7412cf6..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
> -
> -Required properties:
> -- compatible: should be "innolux,p079zca"
> -- reg: DSI virtual channel of the peripheral
> -- power-supply: phandle of the regulator that provides the supply voltage
> -- enable-gpios: panel enable gpio
> -
> -Optional properties:
> -- backlight: phandle of the backlight device attached to the panel
> -
> -Example:
> -
> -     &mipi_dsi {
> -             panel@0 {
> -                     compatible = "innolux,p079zca";
> -                     reg = <0>;
> -                     power-supply = <...>;
> -                     backlight = <&backlight>;
> -                     enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> -             };
> -     };
> diff --git 
> a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml 
> b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 8fc117d1547c..328df95cbe88 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -143,6 +143,8 @@ properties:
>        - innolux,n116bge
>          # InnoLux 15.6" WXGA TFT LCD panel
>        - innolux,n156bge-l21
> +        # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
> +      - innolux,p079zca
>          # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
>        - innolux,zj070na-01p
>          # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
> -- 
> 2.20.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to