Hi Laurent.
On Mon, Mar 09, 2020 at 08:42:10PM +0200, Laurent Pinchart wrote:
> The OrtusTech COM43H4M85ULC is a DPI panel, set the connector type
> accordingly.
>
> Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Reviewed-by: Sam Ravnborg <s...@ravnborg.org>
I assume you will apply to drm-misc-next - OK?
Sam
> ---
> drivers/gpu/drm/panel/panel-simple.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index e14c14ac62b5..145ee05dcacd 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2439,6 +2439,7 @@ static const struct panel_desc ortustech_com43h4m85ulc
> = {
> },
> .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
> + .connector_type = DRM_MODE_CONNECTOR_DPI,
> };
>
> static const struct drm_display_mode osddisplays_osd070t1718_19ts_mode = {
> --
> Regards,
>
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
