Hi Sam,
Thank you for the patch.
On Sun, Feb 16, 2020 at 07:15:10PM +0100, Sam Ravnborg wrote:
> Add display-timings.yaml - that references panel-timings.yaml.
> display-timings.yaml will be used for display bindings
> when they are converted to meta-schema format.
>
> For now the old display-timing.txt points to the new
> display-timings.yaml - and all users are left as-is.
>
> v2:
> - Updated native-mode description
>
> v3:
> - Simpler "^timing" pattern (Rob)
> - timing node is of type object (Rob)
> - added display-timings to panel-common.yaml
> - added yaml document terminator "..."
>
> Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
> Reviewed-by: Rob Herring <r...@kernel.org>
> Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> Cc: Thierry Reding <thierry.red...@gmail.com>
> Cc: Oleksandr Suvorov <oleksandr.suvo...@toradex.com>
> Cc: devicet...@vger.kernel.org
> ---
> .../bindings/display/panel/display-timing.txt | 124 +-----------------
> .../display/panel/display-timings.yaml | 77 +++++++++++
> .../bindings/display/panel/panel-common.yaml | 8 ++
> 3 files changed, 86 insertions(+), 123 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/display-timings.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/display/panel/display-timing.txt
> b/Documentation/devicetree/bindings/display/panel/display-timing.txt
> index 78222ced1874..7f55ad4a40c4 100644
> --- a/Documentation/devicetree/bindings/display/panel/display-timing.txt
> +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt
> @@ -1,123 +1 @@
> -display-timing bindings
> -=======================
> -
> -display-timings node
> ---------------------
> -
> -required properties:
> - - none
> -
> -optional properties:
> - - native-mode: The native mode for the display, in case multiple modes are
> - provided. When omitted, assume the first node is the native.
> -
> -timing subnode
> ---------------
> -
> -required properties:
> - - hactive, vactive: display resolution
> - - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters
> - in pixels
> - vfront-porch, vback-porch, vsync-len: vertical display timing parameters
> in
> - lines
> - - clock-frequency: display clock in Hz
> -
> -optional properties:
> - - hsync-active: hsync pulse is active low/high/ignored
> - - vsync-active: vsync pulse is active low/high/ignored
> - - de-active: data-enable pulse is active low/high/ignored
> - - pixelclk-active: with
> - - active high = drive pixel data on rising edge/
> - sample data on falling edge
> - - active low = drive pixel data on falling edge/
> - sample data on rising edge
> - - ignored = ignored
> - - syncclk-active: with
> - - active high = drive sync on rising edge/
> - sample sync on falling edge of pixel
> - clock
> - - active low = drive sync on falling edge/
> - sample sync on rising edge of pixel
> - clock
> - - omitted = same configuration as pixelclk-active
> - - interlaced (bool): boolean to enable interlaced mode
> - - doublescan (bool): boolean to enable doublescan mode
> - - doubleclk (bool): boolean to enable doubleclock mode
> -
> -All the optional properties that are not bool follow the following logic:
> - <1>: high active
> - <0>: low active
> - omitted: not used on hardware
> -
> -There are different ways of describing the capabilities of a display. The
> -devicetree representation corresponds to the one commonly found in datasheets
> -for displays. If a display supports multiple signal timings, the native-mode
> -can be specified.
> -
> -The parameters are defined as:
> -
> - +----------+-------------------------------------+----------+-------+
> - | | ^ | | |
> - | | |vback_porch | | |
> - | | v | | |
> - +----------#######################################----------+-------+
> - | # ^ # | |
> - | # | # | |
> - | hback # | # hfront | hsync |
> - | porch # | hactive # porch | len |
> - |<-------->#<-------+--------------------------->#<-------->|<----->|
> - | # | # | |
> - | # |vactive # | |
> - | # | # | |
> - | # v # | |
> - +----------#######################################----------+-------+
> - | | ^ | | |
> - | | |vfront_porch | | |
> - | | v | | |
> - +----------+-------------------------------------+----------+-------+
> - | | ^ | | |
> - | | |vsync_len | | |
> - | | v | | |
> - +----------+-------------------------------------+----------+-------+
> -
> -Note: In addition to being used as subnode(s) of display-timings, the timing
> - subnode may also be used on its own. This is appropriate if only one
> mode
> - need be conveyed. In this case, the node should be named
> 'panel-timing'.
> -
> -
> -Example:
> -
> - display-timings {
> - native-mode = <&timing0>;
> - timing0: 1080p24 {
> - /* 1920x1080p24 */
> - clock-frequency = <52000000>;
> - hactive = <1920>;
> - vactive = <1080>;
> - hfront-porch = <25>;
> - hback-porch = <25>;
> - hsync-len = <25>;
> - vback-porch = <2>;
> - vfront-porch = <2>;
> - vsync-len = <2>;
> - hsync-active = <1>;
> - };
> - };
> -
> -Every required property also supports the use of ranges, so the commonly used
> -datasheet description with minimum, typical and maximum values can be used.
> -
> -Example:
> -
> - timing1: timing {
> - /* 1920x1080p24 */
> - clock-frequency = <148500000>;
> - hactive = <1920>;
> - vactive = <1080>;
> - hsync-len = <0 44 60>;
> - hfront-porch = <80 88 95>;
> - hback-porch = <100 148 160>;
> - vfront-porch = <0 4 6>;
> - vback-porch = <0 36 50>;
> - vsync-len = <0 5 6>;
> - };
> +See display-timings.yaml in this directory.
> diff --git
> a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
> b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
> new file mode 100644
> index 000000000000..c8c0c9cb0492
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: display timing bindings
s/timing/timings/
> +
> +maintainers:
> + - Thierry Reding <thierry.red...@gmail.com>
> + - Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
> + - Sam Ravnborg <s...@ravnborg.org>
> +
> +description: |
> + A display panel may be able to handle several display timings,
> + with different resolutions.
> + The display-timings node makes it possible to specify the timing
s/the timing/the timings/
> + and to specify the timing that is native for the display.
> +
> +properties:
> + $nodename:
> + const: display-timings
> +
> + native-mode:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: |
> + The default display timing is the one specified as native-mode.
> + If no native-mode is specified then the first node is assumed the
s/assumed the/assumed to be the/
> + native mode.
> +
> +patternProperties:
> + "^timing":
Should this be "^timing[0-9]*$", or do we want to allow or names ?
> + type: object
> + allOf:
> + - $ref: panel-timing.yaml#
> +
> +additionalProperties: false
> +
> +examples:
> + - |+
> +
> + /*
> + * Example that specifies panel timing using minimum, typical,
> + * maximum values as commonly used in datasheet description.
> + * timing1 is the native-mode.
> + */
> + display-timings {
> + native-mode = <&timing1>;
Does this compile, as there's no phandle named timing1 ?
> + timing0 {
> + /* 1920x1080p24 */
> + clock-frequency = <148500000>;
> + hactive = <1920>;
> + vactive = <1080>;
> + hsync-len = <0 44 60>;
> + hfront-porch = <80 88 95>;
> + hback-porch = <100 148 160>;
> + vfront-porch = <0 4 6>;
> + vback-porch = <0 36 50>;
> + vsync-len = <0 5 6>;
> + };
> + timing1 {
> + /* 1920x1080p24 */
> + clock-frequency = <52000000>;
> + hactive = <1920>;
> + vactive = <1080>;
> + hfront-porch = <25>;
> + hback-porch = <25>;
> + hsync-len = <0 25 25>;
> + vback-porch = <2>;
> + vfront-porch = <2>;
> + vsync-len = <2>;
> + hsync-active = <1>;
> + pixelclk-active = <1>;
> + };
> + };
> +
> +...
> diff --git
> a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> index 8070c439adbd..ed051ba12084 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> @@ -61,6 +61,14 @@ properties:
> allOf:
> - $ref: panel-timing.yaml#
>
> + display-timings:
> + description:
> + Some display panels supports several resolutions with different timing.
s/timing/timings/
> + The display-timings bindings supports specifying several timings and
> + optional specify which is the native mode.
s/optional/optionally/
With these small issues fixed,
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Great work !
> + allOf:
> + - $ref: display-timings.yaml#
> +
> # Connectivity
> port:
> type: object
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
