Not all pixelvalve FIFOs in vc5 have the same depth, so we need to add that
to our vc4_crtc_data structure to be able to compute the fill level
properly later on.
Signed-off-by: Maxime Ripard <max...@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 20 ++++++++++++++++----
drivers/gpu/drm/vc4/vc4_drv.h | 3 +++
2 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index f8e4b2971510..129131a07edd 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -250,11 +250,20 @@ vc4_crtc_update_gamma_lut(struct drm_crtc *crtc)
vc4_crtc_lut_load(crtc);
}
-
-static u32 vc4_get_fifo_full_level(u32 format)
+static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format)
{
- static const u32 fifo_len_bytes = 64;
+ u32 fifo_len_bytes = vc4_crtc->data->fifo_depth;
+ /*
+ * Pixels are pulled from the HVS if the number of bytes is
+ * lower than the FIFO full level.
+ *
+ * The latency of the pixel fetch mechanism is 6 pixels, so we
+ * need to convert those 6 pixels in bytes, depending on the
+ * format, and then substract that from the length of the FIFO
+ * to make sure we never end up in a situation where the FIFO
+ * is full.
+ */
switch (format) {
case PV_CONTROL_FORMAT_DSIV_16:
case PV_CONTROL_FORMAT_DSIC_16:
@@ -369,7 +378,7 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc)
CRTC_WRITE(PV_CONTROL,
VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
- VC4_SET_FIELD(vc4_get_fifo_full_level(format),
+ VC4_SET_FIELD(vc4_get_fifo_full_level(vc4_crtc, format),
PV_CONTROL_FIFO_LEVEL) |
VC4_SET_FIELD(pixel_rep - 1, PV_CONTROL_PIXEL_REP) |
PV_CONTROL_CLR_AT_START |
@@ -1066,6 +1075,7 @@ static const struct vc4_crtc_data bcm2835_pv0_data = {
.hvs_available_channels = BIT(0),
.hvs_output = 0,
.debugfs_name = "crtc0_regs",
+ .fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI0,
@@ -1077,6 +1087,7 @@ static const struct vc4_crtc_data bcm2835_pv1_data = {
.hvs_available_channels = BIT(2),
.hvs_output = 2,
.debugfs_name = "crtc1_regs",
+ .fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI1,
@@ -1088,6 +1099,7 @@ static const struct vc4_crtc_data bcm2835_pv2_data = {
.hvs_available_channels = BIT(1),
.hvs_output = 1,
.debugfs_name = "crtc2_regs",
+ .fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_HDMI,
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index f31a6593da8a..967d57d0ab08 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -448,6 +448,9 @@ to_vc4_encoder(struct drm_encoder *encoder)
}
struct vc4_crtc_data {
+ /* Depth of the PixelValve FIFO in bytes */
+ unsigned int fifo_depth;
+
/* Which channels of the HVS can the output source from */
unsigned int hvs_available_channels;
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
