Dear Yannick,
Thank you for your patch,
Acked-by: Philippe Cornu <philippe.co...@st.com>
Philippe :-)
On 1/21/20 11:14 AM, Yannick Fertre wrote:
> Number of endpoints could exceed the fix value MAX_ENDPOINTS(2).
> Instead of increase simply this value, the number of endpoint
> could be read from device tree. Load sequence has been a little
> rework to take care of several panel or bridge which can be
> connected/disconnected or enable/disable.
>
> Signed-off-by: Yannick Fertré <yannick.fer...@st.com>
> ---
> drivers/gpu/drm/stm/ltdc.c | 104
> ++++++++++++++++++++++-----------------------
> 1 file changed, 52 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index c2815e8..dba8e7f 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -42,8 +42,6 @@
>
> #define MAX_IRQ 4
>
> -#define MAX_ENDPOINTS 2
> -
> #define HWVER_10200 0x010200
> #define HWVER_10300 0x010300
> #define HWVER_20101 0x020101
> @@ -1190,36 +1188,20 @@ int ltdc_load(struct drm_device *ddev)
> struct ltdc_device *ldev = ddev->dev_private;
> struct device *dev = ddev->dev;
> struct device_node *np = dev->of_node;
> - struct drm_bridge *bridge[MAX_ENDPOINTS] = {NULL};
> - struct drm_panel *panel[MAX_ENDPOINTS] = {NULL};
> + struct drm_bridge *bridge;
> + struct drm_panel *panel;
> struct drm_crtc *crtc;
> struct reset_control *rstc;
> struct resource *res;
> - int irq, ret, i, endpoint_not_ready = -ENODEV;
> + int irq, i, nb_endpoints;
> + int ret = -ENODEV;
>
> DRM_DEBUG_DRIVER("\n");
>
> - /* Get endpoints if any */
> - for (i = 0; i < MAX_ENDPOINTS; i++) {
> - ret = drm_of_find_panel_or_bridge(np, 0, i, &panel[i],
> - &bridge[i]);
> -
> - /*
> - * If at least one endpoint is -EPROBE_DEFER, defer probing,
> - * else if at least one endpoint is ready, continue probing.
> - */
> - if (ret == -EPROBE_DEFER)
> - return ret;
> - else if (!ret)
> - endpoint_not_ready = 0;
> - }
> -
> - if (endpoint_not_ready)
> - return endpoint_not_ready;
> -
> - rstc = devm_reset_control_get_exclusive(dev, NULL);
> -
> - mutex_init(&ldev->err_lock);
> + /* Get number of endpoints */
> + nb_endpoints = of_graph_get_endpoint_count(np);
> + if (!nb_endpoints)
> + return -ENODEV;
>
> ldev->pixel_clk = devm_clk_get(dev, "lcd");
> if (IS_ERR(ldev->pixel_clk)) {
> @@ -1233,6 +1215,43 @@ int ltdc_load(struct drm_device *ddev)
> return -ENODEV;
> }
>
> + /* Get endpoints if any */
> + for (i = 0; i < nb_endpoints; i++) {
> + ret = drm_of_find_panel_or_bridge(np, 0, i, &panel, &bridge);
> +
> + /*
> + * If at least one endpoint is -ENODEV, continue probing,
> + * else if at least one endpoint returned an error
> + * (ie -EPROBE_DEFER) then stop probing.
> + */
> + if (ret == -ENODEV)
> + continue;
> + else if (ret)
> + goto err;
> +
> + if (panel) {
> + bridge = drm_panel_bridge_add_typed(panel,
> +
> DRM_MODE_CONNECTOR_DPI);
> + if (IS_ERR(bridge)) {
> + DRM_ERROR("panel-bridge endpoint %d\n", i);
> + ret = PTR_ERR(bridge);
> + goto err;
> + }
> + }
> +
> + if (bridge) {
> + ret = ltdc_encoder_init(ddev, bridge);
> + if (ret) {
> + DRM_ERROR("init encoder endpoint %d\n", i);
> + goto err;
> + }
> + }
> + }
> +
> + rstc = devm_reset_control_get_exclusive(dev, NULL);
> +
> + mutex_init(&ldev->err_lock);
> +
> if (!IS_ERR(rstc)) {
> reset_control_assert(rstc);
> usleep_range(10, 20);
> @@ -1268,7 +1287,6 @@ int ltdc_load(struct drm_device *ddev)
> }
> }
>
> -
> ret = ltdc_get_caps(ddev);
> if (ret) {
> DRM_ERROR("hardware identifier (0x%08x) not supported!\n",
> @@ -1278,27 +1296,6 @@ int ltdc_load(struct drm_device *ddev)
>
> DRM_DEBUG_DRIVER("ltdc hw version 0x%08x\n", ldev->caps.hw_version);
>
> - /* Add endpoints panels or bridges if any */
> - for (i = 0; i < MAX_ENDPOINTS; i++) {
> - if (panel[i]) {
> - bridge[i] = drm_panel_bridge_add_typed(panel[i],
> -
> DRM_MODE_CONNECTOR_DPI);
> - if (IS_ERR(bridge[i])) {
> - DRM_ERROR("panel-bridge endpoint %d\n", i);
> - ret = PTR_ERR(bridge[i]);
> - goto err;
> - }
> - }
> -
> - if (bridge[i]) {
> - ret = ltdc_encoder_init(ddev, bridge[i]);
> - if (ret) {
> - DRM_ERROR("init encoder endpoint %d\n", i);
> - goto err;
> - }
> - }
> - }
> -
> crtc = devm_kzalloc(dev, sizeof(*crtc), GFP_KERNEL);
> if (!crtc) {
> DRM_ERROR("Failed to allocate crtc\n");
> @@ -1331,8 +1328,8 @@ int ltdc_load(struct drm_device *ddev)
>
> return 0;
> err:
> - for (i = 0; i < MAX_ENDPOINTS; i++)
> - drm_panel_bridge_remove(bridge[i]);
> + for (i = 0; i < nb_endpoints; i++)
> + drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
>
> clk_disable_unprepare(ldev->pixel_clk);
>
> @@ -1341,11 +1338,14 @@ int ltdc_load(struct drm_device *ddev)
>
> void ltdc_unload(struct drm_device *ddev)
> {
> - int i;
> + struct device *dev = ddev->dev;
> + int nb_endpoints, i;
>
> DRM_DEBUG_DRIVER("\n");
>
> - for (i = 0; i < MAX_ENDPOINTS; i++)
> + nb_endpoints = of_graph_get_endpoint_count(dev->of_node);
> +
> + for (i = 0; i < nb_endpoints; i++)
> drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
>
> pm_runtime_disable(ddev->dev);
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
