Use generic helper code. Adapt struct komeda_fb users to new location
of respective data members.
Signed-off-by: Andrzej Pietrasiewicz <andrze...@collabora.com>
---
.../arm/display/komeda/d71/d71_component.c | 6 +--
.../arm/display/komeda/komeda_framebuffer.c | 44 +++++--------------
.../arm/display/komeda/komeda_framebuffer.h | 14 ++----
.../display/komeda/komeda_pipeline_state.c | 14 +++---
4 files changed, 26 insertions(+), 52 deletions(-)
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
index 8a02ade369db..5131e51e56d4 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
@@ -186,7 +186,7 @@ static void d71_layer_update_fb(struct komeda_component *c,
struct komeda_fb *kfb,
dma_addr_t *addr)
{
- struct drm_framebuffer *fb = &kfb->base;
+ struct drm_framebuffer *fb = &kfb->base.base;
const struct drm_format_info *info = fb->format;
u32 __iomem *reg = c->reg;
int block_h;
@@ -234,9 +234,9 @@ static void d71_layer_update(struct komeda_component *c,
st->afbc_crop_b));
/* afbc 1.2 wants payload, afbc 1.0/1.1 wants end_addr */
if (fb->modifier & AFBC_FORMAT_MOD_TILED)
- addr = st->addr[0] + kfb->offset_payload;
+ addr = st->addr[0] + kfb->base.offset_payload;
else
- addr = st->addr[0] + kfb->afbc_size - 1;
+ addr = st->addr[0] + kfb->base.afbc_size - 1;
malidp_write32(reg, BLK_P1_PTR_LOW, lower_32_bits(addr));
malidp_write32(reg, BLK_P1_PTR_HIGH, upper_32_bits(addr));
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
index bf4309b62d37..45318ed052a9 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
@@ -70,46 +70,26 @@ komeda_fb_create(struct drm_device *dev, struct drm_file
*file,
info = drm_get_format_info(dev, mode_cmd);
if (mode_cmd->modifier[0]) {
- u32 alignment_w = 0, alignment_h = 0;
- u32 alignment_header, n_blocks, bpp;
-
if (num_planes != 1) {
DRM_DEBUG_KMS("AFBC requires exactly 1 plane.\n");
ret = -EINVAL;
goto err_cleanup;
}
- if (!drm_afbc_get_superblock_wh(mode_cmd->modifier[0],
&alignment_w, &alignment_h)) {
- ret = -EINVAL;
- goto err_cleanup;
- }
-
/* tiled header afbc */
- if (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_TILED) {
- alignment_w *= AFBC_TH_LAYOUT_ALIGNMENT;
- alignment_h *= AFBC_TH_LAYOUT_ALIGNMENT;
- alignment_header = AFBC_TH_BODY_START_ALIGNMENT;
- } else {
- alignment_header = AFBC_BODY_START_ALIGNMENT;
- }
-
- kfb->aligned_w = ALIGN(mode_cmd->width, alignment_w);
- kfb->aligned_h = ALIGN(mode_cmd->height, alignment_h);
+ if (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_TILED)
+ kfb->base.alignment_header =
AFBC_TH_BODY_START_ALIGNMENT;
+ else
+ kfb->base.alignment_header = AFBC_BODY_START_ALIGNMENT;
- if (mode_cmd->offsets[0] % alignment_header) {
+ if (mode_cmd->offsets[0] % kfb->base.alignment_header) {
DRM_DEBUG_KMS("afbc offset alignment check failed.\n");
ret = -EINVAL;
goto err_cleanup;
}
- n_blocks = (kfb->aligned_w * kfb->aligned_h) /
AFBC_SUPERBLK_PIXELS;
- kfb->offset_payload = ALIGN(n_blocks * AFBC_HEADER_SIZE,
alignment_header);
-
- bpp = komeda_get_afbc_format_bpp(info, mode_cmd->modifier[0]);
- kfb->afbc_size = kfb->offset_payload
- + n_blocks * ALIGN(bpp * AFBC_SUPERBLK_PIXELS /
8, AFBC_SUPERBLK_ALIGNMENT);
- check.min_size[0] = kfb->afbc_size + mode_cmd->offsets[0];
- check.use_min_size = true;
+ kfb->base.bpp = komeda_get_afbc_format_bpp(info,
mode_cmd->modifier[0]);
+ check.data = &kfb->base;
} else {
ret = komeda_fb_check_src_coords(kfb, 0, 0, mode_cmd->width,
mode_cmd->height);
@@ -144,14 +124,14 @@ komeda_fb_create(struct drm_device *dev, struct drm_file
*file,
goto err_cleanup;
}
- ret = drm_gem_fb_init_with_funcs(&kfb->base, dev, mode_cmd, objs,
+ ret = drm_gem_fb_init_with_funcs(&kfb->base.base, dev, mode_cmd, objs,
num_planes, &komeda_fb_funcs);
if (ret < 0)
goto err_cleanup;
kfb->is_va = mdev->iommu ? true : false;
- return &kfb->base;
+ return &kfb->base.base;
err_cleanup:
for (i = 0; i < num_planes; i++)
@@ -164,7 +144,7 @@ komeda_fb_create(struct drm_device *dev, struct drm_file
*file,
int komeda_fb_check_src_coords(const struct komeda_fb *kfb,
u32 src_x, u32 src_y, u32 src_w, u32 src_h)
{
- const struct drm_framebuffer *fb = &kfb->base;
+ const struct drm_framebuffer *fb = &kfb->base.base;
const struct drm_format_info *info = fb->format;
u32 block_w = drm_format_info_block_width(fb->format, 0);
u32 block_h = drm_format_info_block_height(fb->format, 0);
@@ -239,7 +219,7 @@ komeda_fb_get_pixel_addr_nofb(const struct drm_format_info
*format,
dma_addr_t
komeda_fb_get_pixel_addr(struct komeda_fb *kfb, int x, int y, int plane)
{
- struct drm_framebuffer *fb = &kfb->base;
+ struct drm_framebuffer *fb = &kfb->base.base;
const struct drm_gem_cma_object *obj;
if (plane >= fb->format->num_planes) {
@@ -258,7 +238,7 @@ komeda_fb_get_pixel_addr(struct komeda_fb *kfb, int x, int
y, int plane)
bool komeda_fb_is_layer_supported(struct komeda_fb *kfb, u32 layer_type,
u32 rot)
{
- struct drm_framebuffer *fb = &kfb->base;
+ struct drm_framebuffer *fb = &kfb->base.base;
struct komeda_dev *mdev = fb->dev->dev_private;
u32 fourcc = fb->format->format;
u64 modifier = fb->modifier;
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h
b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h
index 2f1f421d3e7f..6cb9d321b6d4 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h
@@ -14,8 +14,8 @@
* struct komeda_fb - Entending drm_framebuffer with komeda attribute
*/
struct komeda_fb {
- /** @base: &drm_framebuffer */
- struct drm_framebuffer base;
+ /** @base: &drm_afbc_framebuffer */
+ struct drm_afbc_framebuffer base;
/**
* @format_caps:
* extends drm_format_info for komeda specific information
@@ -23,17 +23,9 @@ struct komeda_fb {
const struct komeda_format_caps *format_caps;
/** @is_va: if smmu is enabled, it will be true */
bool is_va;
- /** @aligned_w: aligned frame buffer width */
- u32 aligned_w;
- /** @aligned_h: aligned frame buffer height */
- u32 aligned_h;
- /** @afbc_size: minimum size of afbc */
- u32 afbc_size;
- /** @offset_payload: start of afbc body buffer */
- u32 offset_payload;
};
-#define to_kfb(dfb) container_of(dfb, struct komeda_fb, base)
+#define to_kfb(dfb) container_of(dfb, struct komeda_fb, base.base)
struct drm_framebuffer *
komeda_fb_create(struct drm_device *dev, struct drm_file *file,
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
index 0930234abb9d..f7721244edad 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
@@ -320,7 +320,7 @@ komeda_layer_check_cfg(struct komeda_layer *layer,
else
line_sz = dflow->in_w;
- if (kfb->base.format->hsub > 1)
+ if (kfb->base.base.format->hsub > 1)
max_line_sz = layer->yuv_line_sz;
else
max_line_sz = layer->line_sz;
@@ -360,12 +360,14 @@ komeda_layer_validate(struct komeda_layer *layer,
st->rot = dflow->rot;
if (fb->modifier) {
- st->hsize = kfb->aligned_w;
- st->vsize = kfb->aligned_h;
+ st->hsize = kfb->base.aligned_width;
+ st->vsize = kfb->base.aligned_height;
st->afbc_crop_l = dflow->in_x;
- st->afbc_crop_r = kfb->aligned_w - dflow->in_x - dflow->in_w;
+ st->afbc_crop_r = kfb->base.aligned_width
+ - dflow->in_x - dflow->in_w;
st->afbc_crop_t = dflow->in_y;
- st->afbc_crop_b = kfb->aligned_h - dflow->in_y - dflow->in_h;
+ st->afbc_crop_b = kfb->base.aligned_height
+ - dflow->in_y - dflow->in_h;
} else {
st->hsize = dflow->in_w;
st->vsize = dflow->in_h;
@@ -419,7 +421,7 @@ komeda_wb_layer_validate(struct komeda_layer *wb_layer,
st->hsize = dflow->out_w;
st->vsize = dflow->out_h;
- for (i = 0; i < kfb->base.format->num_planes; i++)
+ for (i = 0; i < kfb->base.base.format->num_planes; i++)
st->addr[i] = komeda_fb_get_pixel_addr(kfb, dflow->out_x,
dflow->out_y, i);
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
