The panel common bindings provide a gpios-reset property which is
active low by default. Let's support it in the simple driver.
De-asserting the reset pin implies a physical high, which in turns is
a logic low.
Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
drivers/gpu/drm/panel/panel-simple.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 5d487686d25c..15dd495c347d 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -110,6 +110,7 @@ struct panel_simple {
struct i2c_adapter *ddc;
struct gpio_desc *enable_gpio;
+ struct gpio_desc *reset_gpio;
struct drm_display_mode override_mode;
};
@@ -433,12 +434,21 @@ static int panel_simple_probe(struct device *dev, const
struct panel_desc *desc)
if (IS_ERR(panel->supply))
return PTR_ERR(panel->supply);
+ panel->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(panel->reset_gpio)) {
+ err = PTR_ERR(panel->reset_gpio);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "failed to request reset pin: %d\n", err);
+ return err;
+ }
+
panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(panel->enable_gpio)) {
err = PTR_ERR(panel->enable_gpio);
if (err != -EPROBE_DEFER)
- dev_err(dev, "failed to request GPIO: %d\n", err);
+ dev_err(dev, "failed to request enable pin: %d\n", err);
return err;
}
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
