Hi Fabrizio,
Thank you for the patch.
On Fri, Dec 06, 2019 at 04:32:52PM +0000, Fabrizio Castro wrote:
> Primary and companion encoders need to set the same mode for
> things to work properly.
>
> rcar_lvds_mode_set gets called into for the primary encoder only,
> therefore initialize the companion encoder mode while sorting
> the primary encoder mode out.
>
> Fixes: fa440d870358 ("drm: rcar-du: lvds: Add support for dual-link mode")
> Signed-off-by: Fabrizio Castro <fabrizio.cas...@bp.renesas.com>
Would you mind rebasing this on top of "drm: rcar-du: lvds: Get mode
from state" ?
> ---
> v3->v4:
> * New patch extracted from patch:
> "drm: rcar-du: lvds: Add dual-LVDS panels support"
> ---
> drivers/gpu/drm/rcar-du/rcar_lvds.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c
> b/drivers/gpu/drm/rcar-du/rcar_lvds.c
> index cb2147c..eed5611 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
> @@ -614,6 +614,18 @@ static void rcar_lvds_mode_set(struct drm_bridge *bridge,
> lvds->display_mode = *adjusted_mode;
>
> rcar_lvds_get_lvds_mode(lvds);
> + if (lvds->companion) {
> + struct rcar_lvds *companion_lvds = bridge_to_rcar_lvds(
> + lvds->companion);
> +
> + /*
> + * FIXME: We should not be messing with the companion encoder
> + * private data from the primary encoder, but since
> + * rcar_lvds_mode_set gets called into for the primary encoder
> + * only, we don't have much of a choice for now.
> + */
> + companion_lvds->mode = lvds->mode;
> + }
> }
>
> static int rcar_lvds_attach(struct drm_bridge *bridge)
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
