On Tue, Sep 10, 2019 at 03:59:13PM +0800, Wen He wrote:
> Configure the display Quality of service (QoS) levels priority if the
> optional property node "arm,malidp-aqros-value" is defined in DTS file.
>
> QoS signaling using AQROS and AWQOS AXI interface signals, the AQROS is
> driven from the "RQOS" register, so needed to program the RQOS register
> to avoid the high resolutions flicker issue on the LS1028A platform.
>
> Signed-off-by: Wen He <wen.h...@nxp.com>
Acked-by: Liviu Dudau <liviu.du...@arm.com>
Thanks for the patch! I will pull this into the malidp code and push it to
drm-misc-next in the following days.
Best regards,
Liviu
> ---
> drivers/gpu/drm/arm/malidp_drv.c | 6 ++++++
> drivers/gpu/drm/arm/malidp_hw.c | 9 +++++++++
> drivers/gpu/drm/arm/malidp_hw.h | 3 +++
> drivers/gpu/drm/arm/malidp_regs.h | 10 ++++++++++
> 4 files changed, 28 insertions(+)
>
> diff --git a/drivers/gpu/drm/arm/malidp_drv.c
> b/drivers/gpu/drm/arm/malidp_drv.c
> index 333b88a5efb0..8a76315aaa0f 100644
> --- a/drivers/gpu/drm/arm/malidp_drv.c
> +++ b/drivers/gpu/drm/arm/malidp_drv.c
> @@ -817,6 +817,12 @@ static int malidp_bind(struct device *dev)
>
> malidp->core_id = version;
>
> + ret = of_property_read_u32(dev->of_node,
> + "arm,malidp-arqos-value",
> + &hwdev->arqos_value);
> + if (ret)
> + hwdev->arqos_value = 0x0;
> +
> /* set the number of lines used for output of RGB data */
> ret = of_property_read_u8_array(dev->of_node,
> "arm,malidp-output-port-lines",
> diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c
> index bd8265f02e0b..ca570b135478 100644
> --- a/drivers/gpu/drm/arm/malidp_hw.c
> +++ b/drivers/gpu/drm/arm/malidp_hw.c
> @@ -379,6 +379,15 @@ static void malidp500_modeset(struct malidp_hw_device
> *hwdev, struct videomode *
> malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED,
> MALIDP_DE_DISPLAY_FUNC);
> else
> malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED,
> MALIDP_DE_DISPLAY_FUNC);
> +
> + /*
> + * Program the RQoS register to avoid high resolutions flicker
> + * issue on the LS1028A.
> + */
> + if (hwdev->arqos_value) {
> + val = hwdev->arqos_value;
> + malidp_hw_setbits(hwdev, val, MALIDP500_RQOS_QUALITY);
> + }
> }
>
> int malidp_format_get_bpp(u32 fmt)
> diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h
> index 968a65eed371..e4c36bc90bda 100644
> --- a/drivers/gpu/drm/arm/malidp_hw.h
> +++ b/drivers/gpu/drm/arm/malidp_hw.h
> @@ -251,6 +251,9 @@ struct malidp_hw_device {
>
> /* size of memory used for rotating layers, up to two banks available */
> u32 rotation_memory[2];
> +
> + /* priority level of RQOS register used for driven the ARQOS signal */
> + u32 arqos_value;
> };
>
> static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
> diff --git a/drivers/gpu/drm/arm/malidp_regs.h
> b/drivers/gpu/drm/arm/malidp_regs.h
> index 993031542fa1..514c50dcb74d 100644
> --- a/drivers/gpu/drm/arm/malidp_regs.h
> +++ b/drivers/gpu/drm/arm/malidp_regs.h
> @@ -210,6 +210,16 @@
> #define MALIDP500_CONFIG_VALID 0x00f00
> #define MALIDP500_CONFIG_ID 0x00fd4
>
> +/*
> + * The quality of service (QoS) register on the DP500. RQOS register values
> + * are driven by the ARQOS signal, using AXI transacations, dependent on the
> + * FIFO input level.
> + * The RQOS register can also set QoS levels for:
> + * - RED_ARQOS @ A 4-bit signal value for close to underflow conditions
> + * - GREEN_ARQOS @ A 4-bit signal value for normal conditions
> + */
> +#define MALIDP500_RQOS_QUALITY 0x00500
> +
> /* register offsets and bits specific to DP550/DP650 */
> #define MALIDP550_ADDR_SPACE_SIZE 0x10000
> #define MALIDP550_DE_CONTROL 0x00010
> --
> 2.17.1
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
