The board now uses the simple-audio-card driver.
Signed-off-by: Paul Cercueil <p...@crapouillou.net>
Tested-by: Artur Rojek <cont...@artur-rojek.eu>
---
sound/soc/jz4740/Kconfig | 25 +--------
sound/soc/jz4740/Makefile | 5 --
sound/soc/jz4740/qi_lb60.c | 106 -------------------------------------
3 files changed, 2 insertions(+), 134 deletions(-)
delete mode 100644 sound/soc/jz4740/qi_lb60.c
diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig
index 6b757168693e..e72f826062e9 100644
--- a/sound/soc/jz4740/Kconfig
+++ b/sound/soc/jz4740/Kconfig
@@ -1,30 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
-config SND_JZ4740_SOC
- tristate "SoC Audio for Ingenic JZ4740 SoC"
- depends on MIPS || COMPILE_TEST
- select SND_SOC_GENERIC_DMAENGINE_PCM
- help
- Say Y or M if you want to add support for codecs attached to
- the JZ4740 I2S interface. You will also need to select the audio
- interfaces to support below.
-
-if SND_JZ4740_SOC
-
config SND_JZ4740_SOC_I2S
tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC"
+ depends on MIPS || COMPILE_TEST
depends on HAS_IOMEM
+ select SND_SOC_GENERIC_DMAENGINE_PCM
help
Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740
based boards.
-
-config SND_JZ4740_SOC_QI_LB60
- tristate "SoC Audio support for Qi LB60"
- depends on HAS_IOMEM
- depends on JZ4740_QI_LB60 || COMPILE_TEST
- select SND_JZ4740_SOC_I2S
- select SND_SOC_JZ4740_CODEC
- help
- Say Y if you want to add support for ASoC audio on the Qi LB60 board
- a.k.a Qi Ben NanoNote.
-
-endif
diff --git a/sound/soc/jz4740/Makefile b/sound/soc/jz4740/Makefile
index fb10e9ad9ff7..f8701c9b09fe 100644
--- a/sound/soc/jz4740/Makefile
+++ b/sound/soc/jz4740/Makefile
@@ -5,8 +5,3 @@
snd-soc-jz4740-i2s-objs := jz4740-i2s.o
obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o
-
-# Jz4740 Machine Support
-snd-soc-qi-lb60-objs := qi_lb60.o
-
-obj-$(CONFIG_SND_JZ4740_SOC_QI_LB60) += snd-soc-qi-lb60.o
diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c
deleted file mode 100644
index 8ef6f41dcfbe..000000000000
--- a/sound/soc/jz4740/qi_lb60.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009, Lars-Peter Clausen <l...@metafoo.de>
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <linux/gpio/consumer.h>
-
-struct qi_lb60 {
- struct gpio_desc *snd_gpio;
- struct gpio_desc *amp_gpio;
-};
-
-static int qi_lb60_spk_event(struct snd_soc_dapm_widget *widget,
- struct snd_kcontrol *ctrl, int event)
-{
- struct qi_lb60 *qi_lb60 = snd_soc_card_get_drvdata(widget->dapm->card);
- int on = !SND_SOC_DAPM_EVENT_OFF(event);
-
- gpiod_set_value_cansleep(qi_lb60->snd_gpio, on);
- gpiod_set_value_cansleep(qi_lb60->amp_gpio, on);
-
- return 0;
-}
-
-static const struct snd_soc_dapm_widget qi_lb60_widgets[] = {
- SND_SOC_DAPM_SPK("Speaker", qi_lb60_spk_event),
- SND_SOC_DAPM_MIC("Mic", NULL),
-};
-
-static const struct snd_soc_dapm_route qi_lb60_routes[] = {
- {"Mic", NULL, "MIC"},
- {"Speaker", NULL, "LOUT"},
- {"Speaker", NULL, "ROUT"},
-};
-
-SND_SOC_DAILINK_DEFS(hifi,
- DAILINK_COMP_ARRAY(COMP_CPU("jz4740-i2s")),
- DAILINK_COMP_ARRAY(COMP_CODEC("jz4740-codec", "jz4740-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("jz4740-i2s")));
-
-static struct snd_soc_dai_link qi_lb60_dai = {
- .name = "jz4740",
- .stream_name = "jz4740",
- .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM,
- SND_SOC_DAILINK_REG(hifi),
-};
-
-static struct snd_soc_card qi_lb60_card = {
- .name = "QI LB60",
- .owner = THIS_MODULE,
- .dai_link = &qi_lb60_dai,
- .num_links = 1,
-
- .dapm_widgets = qi_lb60_widgets,
- .num_dapm_widgets = ARRAY_SIZE(qi_lb60_widgets),
- .dapm_routes = qi_lb60_routes,
- .num_dapm_routes = ARRAY_SIZE(qi_lb60_routes),
- .fully_routed = true,
-};
-
-static int qi_lb60_probe(struct platform_device *pdev)
-{
- struct qi_lb60 *qi_lb60;
- struct snd_soc_card *card = &qi_lb60_card;
-
- qi_lb60 = devm_kzalloc(&pdev->dev, sizeof(*qi_lb60), GFP_KERNEL);
- if (!qi_lb60)
- return -ENOMEM;
-
- qi_lb60->snd_gpio = devm_gpiod_get(&pdev->dev, "snd", GPIOD_OUT_LOW);
- if (IS_ERR(qi_lb60->snd_gpio))
- return PTR_ERR(qi_lb60->snd_gpio);
-
- qi_lb60->amp_gpio = devm_gpiod_get(&pdev->dev, "amp", GPIOD_OUT_LOW);
- if (IS_ERR(qi_lb60->amp_gpio))
- return PTR_ERR(qi_lb60->amp_gpio);
-
- card->dev = &pdev->dev;
-
- snd_soc_card_set_drvdata(card, qi_lb60);
-
- return devm_snd_soc_register_card(&pdev->dev, card);
-}
-
-static struct platform_driver qi_lb60_driver = {
- .driver = {
- .name = "qi-lb60-audio",
- },
- .probe = qi_lb60_probe,
-};
-
-module_platform_driver(qi_lb60_driver);
-
-MODULE_AUTHOR("Lars-Peter Clausen <l...@metafoo.de>");
-MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:qi-lb60-audio");
--
2.21.0.593.g511ec345e18
