Hi Shobhit
Thanks for the patch. Feedback below...
On Tue, Jun 11, 2019 at 09:32:32PM -0700, Shobhit Kukreti wrote:
> Port the sky81452-backlight driver to adhere to new gpio descriptor based
> APIs. Modified the file sky81452-backlight.c and sky81452-backlight.h.
> The gpio descriptor property in device tree should be "sky81452-en-gpios"
That is contradicted by the device tree bindings. The property should
remain "gpios" as it was before this conversion.
> Removed unnecessary header files "linux/gpio.h" and "linux/of_gpio.h".
>
> Signed-off-by: Shobhit Kukreti <shobhitkukr...@gmail.com>
What level of testing have you done? Is this a fix for hardware you own
or a cleanup after searching the sources?
> ---
> drivers/video/backlight/sky81452-backlight.c | 24
> ++++++++++++------------
> include/linux/platform_data/sky81452-backlight.h | 4 +++-
> 2 files changed, 15 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/video/backlight/sky81452-backlight.c
> b/drivers/video/backlight/sky81452-backlight.c
> index d414c7a..12ef628 100644
> --- a/drivers/video/backlight/sky81452-backlight.c
> +++ b/drivers/video/backlight/sky81452-backlight.c
> @@ -19,12 +19,10 @@
>
> #include <linux/backlight.h>
> #include <linux/err.h>
> -#include <linux/gpio.h>
> #include <linux/init.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/of.h>
> -#include <linux/of_gpio.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/platform_data/sky81452-backlight.h>
> @@ -193,7 +191,6 @@ static struct sky81452_bl_platform_data
> *sky81452_bl_parse_dt(
> pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
> pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
> pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
> - pdata->gpio_enable = of_get_gpio(np, 0);
>
> ret = of_property_count_u32_elems(np, "led-sources");
> if (ret < 0) {
> @@ -274,13 +271,17 @@ static int sky81452_bl_probe(struct platform_device
> *pdev)
> if (IS_ERR(pdata))
> return PTR_ERR(pdata);
> }
> -
> - if (gpio_is_valid(pdata->gpio_enable)) {
> - ret = devm_gpio_request_one(dev, pdata->gpio_enable,
> - GPIOF_OUT_INIT_HIGH, "sky81452-en");
> - if (ret < 0) {
> - dev_err(dev, "failed to request GPIO. err=%d\n", ret);
> - return ret;
> + pdata->gpiod_enable = devm_gpiod_get(dev, "sk81452-en", GPIOD_OUT_HIGH);
As above... I think the second argument here needs to be NULL in order
to preserve the current DT bindings.
> + if (IS_ERR(pdata->gpiod_enable)) {
> + long ret = PTR_ERR(pdata->gpiod_enable);
> +
> + /**
Nitpicking... but no second star here. That's a trigger symbold for
documentation processors.
> + * gpiod_enable is optional in device tree.
> + * Return error only if gpio was assigned in device tree
Also nitpicking but I had to read this a few times because
gpiod_enable is not in device tree, gpios is.
This is a common pattern so the comment can be very short. Something
like:
This DT property is optional so no need to propagate ENOENT
> + */
> + if (ret != -ENOENT) {
> + dev_err(dev, "failed to request GPIO. err=%ld\n", ret);
> + return PTR_ERR(pdata->gpiod_enable);
> }
> }
>
> @@ -323,8 +324,7 @@ static int sky81452_bl_remove(struct platform_device
> *pdev)
> bd->props.brightness = 0;
> backlight_update_status(bd);
>
> - if (gpio_is_valid(pdata->gpio_enable))
> - gpio_set_value_cansleep(pdata->gpio_enable, 0);
> + gpiod_set_value_cansleep(pdata->gpiod_enable, 0);
>
> return 0;
> }
> diff --git a/include/linux/platform_data/sky81452-backlight.h
> b/include/linux/platform_data/sky81452-backlight.h
> index 1231e9b..dc4cb85 100644
> --- a/include/linux/platform_data/sky81452-backlight.h
> +++ b/include/linux/platform_data/sky81452-backlight.h
> @@ -20,6 +20,8 @@
> #ifndef _SKY81452_BACKLIGHT_H
> #define _SKY81452_BACKLIGHT_H
>
> +#include <linux/gpio/consumer.h>
> +
This heaer file should be included from the C file... it is not required
to parse the header.
Daniel.
> /**
> * struct sky81452_platform_data
> * @name: backlight driver name.
> @@ -34,7 +36,7 @@
> */
> struct sky81452_bl_platform_data {
> const char *name;
> - int gpio_enable;
> + struct gpio_desc *gpiod_enable;
> unsigned int enable;
> bool ignore_pwm;
> bool dpwm_mode;
> --
> 2.7.4
>
