Hi,
On 10/6/19 1:13, Linus Walleij wrote:
> This converts the Analogix display port to use GPIO descriptors
> instead of DT-extracted numbers.
>
> Cc: Douglas Anderson <diand...@chromium.org>
> Cc: Sean Paul <seanp...@chromium.org>
> Cc: Marek Szyprowski <m.szyprow...@samsung.com>
> Cc: Enric Balletbo i Serra <enric.balle...@collabora.com>
> Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balle...@collabora.com>
> ---
> .../drm/bridge/analogix/analogix_dp_core.c | 28 +++++++++----------
> .../drm/bridge/analogix/analogix_dp_core.h | 4 ++-
> .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +++++-----
> 3 files changed, 23 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 225f5e5dd69b..64842bbb2f3d 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -18,8 +18,7 @@
> #include <linux/iopoll.h>
> #include <linux/interrupt.h>
> #include <linux/of.h>
> -#include <linux/of_gpio.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/component.h>
> #include <linux/phy/phy.h>
>
> @@ -1585,12 +1584,18 @@ analogix_dp_bind(struct device *dev, struct
> drm_device *drm_dev,
>
> dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd");
>
> - dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0);
> - if (!gpio_is_valid(dp->hpd_gpio))
> - dp->hpd_gpio = of_get_named_gpio(dev->of_node,
> - "samsung,hpd-gpio", 0);
> + /* Try two different names */
> + dp->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
> + if (!dp->hpd_gpiod)
> + dp->hpd_gpiod = devm_gpiod_get_optional(dev, "samsung,hpd",
> + GPIOD_IN);
> + if (IS_ERR(dp->hpd_gpiod)) {
> + dev_err(dev, "error getting HDP GPIO: %ld\n",
> + PTR_ERR(dp->hpd_gpiod));
> + return ERR_CAST(dp->hpd_gpiod);
> + }
>
> - if (gpio_is_valid(dp->hpd_gpio)) {
> + if (dp->hpd_gpiod) {
> /*
> * Set up the hotplug GPIO from the device tree as an interrupt.
> * Simply specifying a different interrupt in the device tree
> @@ -1598,16 +1603,9 @@ analogix_dp_bind(struct device *dev, struct drm_device
> *drm_dev,
> * using a GPIO. We also need the actual GPIO specifier so
> * that we can get the current state of the GPIO.
> */
> - ret = devm_gpio_request_one(&pdev->dev, dp->hpd_gpio, GPIOF_IN,
> - "hpd_gpio");
> - if (ret) {
> - dev_err(&pdev->dev, "failed to get hpd gpio\n");
> - return ERR_PTR(ret);
> - }
> - dp->irq = gpio_to_irq(dp->hpd_gpio);
> + dp->irq = gpiod_to_irq(dp->hpd_gpiod);
> irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
> } else {
> - dp->hpd_gpio = -ENODEV;
> dp->irq = platform_get_irq(pdev, 0);
> irq_flags = 0;
> }
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> index 769255dc6e99..dc65c2bafa63 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> @@ -38,6 +38,8 @@
> #define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
> #define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
>
> +struct gpio_desc;
> +
> enum link_lane_count_type {
> LANE_COUNT1 = 1,
> LANE_COUNT2 = 2,
> @@ -171,7 +173,7 @@ struct analogix_dp_device {
> struct link_train link_train;
> struct phy *phy;
> int dpms_mode;
> - int hpd_gpio;
> + struct gpio_desc *hpd_gpiod;
> bool force_hpd;
> bool psr_enable;
> bool fast_train_enable;
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index a5f2763d72e4..7aab2d6d710c 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -12,7 +12,7 @@
>
> #include <linux/delay.h>
> #include <linux/device.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/io.h>
> #include <linux/iopoll.h>
>
> @@ -397,7 +397,7 @@ void analogix_dp_clear_hotplug_interrupts(struct
> analogix_dp_device *dp)
> {
> u32 reg;
>
> - if (gpio_is_valid(dp->hpd_gpio))
> + if (dp->hpd_gpiod)
> return;
>
> reg = HOTPLUG_CHG | HPD_LOST | PLUG;
> @@ -411,7 +411,7 @@ void analogix_dp_init_hpd(struct analogix_dp_device *dp)
> {
> u32 reg;
>
> - if (gpio_is_valid(dp->hpd_gpio))
> + if (dp->hpd_gpiod)
> return;
>
> analogix_dp_clear_hotplug_interrupts(dp);
> @@ -434,8 +434,8 @@ enum dp_irq_type analogix_dp_get_irq_type(struct
> analogix_dp_device *dp)
> {
> u32 reg;
>
> - if (gpio_is_valid(dp->hpd_gpio)) {
> - reg = gpio_get_value(dp->hpd_gpio);
> + if (dp->hpd_gpiod) {
> + reg = gpiod_get_value(dp->hpd_gpiod);
> if (reg)
> return DP_IRQ_TYPE_HP_CABLE_IN;
> else
> @@ -507,8 +507,8 @@ int analogix_dp_get_plug_in_status(struct
> analogix_dp_device *dp)
> {
> u32 reg;
>
> - if (gpio_is_valid(dp->hpd_gpio)) {
> - if (gpio_get_value(dp->hpd_gpio))
> + if (dp->hpd_gpiod) {
> + if (gpiod_get_value(dp->hpd_gpiod))
> return 0;
> } else {
> reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
