This patch checks a support of YCBCR420 outputs on an encoder level.
If the input mode is YCBCR420-only mode then it prepares DP as an YCBCR420
output, else it continues with RGB output mode.
It set output_format to INTEL_OUTPUT_FORMAT_YCBCR420 in order to using
a pipe scaler as RGB to YCbCr 4:4:4.
v2:
Addressed review comments from Ville.
Style fixed with few naming.
%s/config/crtc_state/
%s/intel_crtc/crtc/
If lscon is active, it makes not to call intel_dp_ycbcr420_config()
to avoid to clobber of lspcon_ycbcr420_config() routine.
And it move the 420_only check into the intel_dp_ycbcr420_config().
v3: Fix uninitialized return value and it is reported by Dan Carpenter.
v4:
Addressed review comments from Ville.
In order to avoid the extra indentation, it inverts if-clause on
intel_dp_ycbcr420_config().
Remove the error print where no errors print are allowed.
v6: Rebase
Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong....@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 35 ++++++++++++++++++++++++++++++++-
1 file changed, 34 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 53cc4afea256..06a3417a88d1 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2085,6 +2085,34 @@ intel_dp_compute_link_config(struct intel_encoder
*encoder,
return 0;
}
+static int
+intel_dp_ycbcr420_config(struct drm_connector *connector,
+ struct intel_crtc_state *crtc_state)
+{
+ const struct drm_display_info *info = &connector->display_info;
+ const struct drm_display_mode *adjusted_mode =
+ &crtc_state->base.adjusted_mode;
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ int ret;
+
+ if (!drm_mode_is_420_only(info, adjusted_mode) ||
+ !connector->ycbcr_420_allowed)
+ return 0;
+
+ crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+
+ /* YCBCR 420 output conversion needs a scaler */
+ ret = skl_update_scaler_crtc(crtc_state);
+ if (ret) {
+ DRM_DEBUG_KMS("Scaler allocation for output failed\n");
+ return ret;
+ }
+
+ intel_pch_panel_fitting(crtc, crtc_state, DRM_MODE_SCALE_FULLSCREEN);
+
+ return 0;
+}
+
bool intel_dp_limited_color_range(const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
@@ -2124,7 +2152,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
to_intel_digital_connector_state(conn_state);
bool constant_n = drm_dp_has_quirk(&intel_dp->desc,
DP_DPCD_QUIRK_CONSTANT_N);
- int ret, output_bpp;
+ int ret = 0, output_bpp;
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
pipe_config->has_pch_encoder = true;
@@ -2132,6 +2160,11 @@ intel_dp_compute_config(struct intel_encoder *encoder,
pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
if (lspcon->active)
lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
+ else
+ ret = intel_dp_ycbcr420_config(&intel_connector->base,
pipe_config);
+
+ if (ret)
+ return ret;
pipe_config->has_drrs = false;
if (IS_G4X(dev_priv) || port == PORT_A)
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
