Hi Andrzej,
On 12/04/2019 10.40, Andrzej Hajda wrote:
> On 12.04.2019 09:33, Andrzej Hajda wrote:
>> On 01.04.2019 14:41, Peter Ujfalusi wrote:
>>> The TFP410 supports 24 bit, single-edge and 12 bit, dual-edge modes.
>>> Depending on how many wires are used (24/12) the driver can set the correct
>>> bus_format.
>>>
>>> If the information is not available in DT then assume 24 bit, single-edge
>>> setup.
>>>
>>> Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
>> Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>
>>
>> The patch does not apply on drm-misc-next. Could you rebase it.
>
>
> OK, with HPD patch applied it works, I will queue all three patches to
> drm-misc-next.
Thank you!
- Péter
>
>
> Regards
>
> Andrzej
>
>
>>
>>
>> --
>> Regards
>> Andrzej
>>
>>> ---
>>> drivers/gpu/drm/bridge/ti-tfp410.c | 17 +++++++++++++++++
>>> 1 file changed, 17 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c
>>> b/drivers/gpu/drm/bridge/ti-tfp410.c
>>> index 6fc831eb3804..8b0e71bd3ca7 100644
>>> --- a/drivers/gpu/drm/bridge/ti-tfp410.c
>>> +++ b/drivers/gpu/drm/bridge/ti-tfp410.c
>>> @@ -29,6 +29,7 @@ struct tfp410 {
>>> struct drm_connector connector;
>>> unsigned int connector_type;
>>>
>>> + u32 bus_format;
>>> struct i2c_adapter *ddc;
>>> struct gpio_desc *hpd;
>>> int hpd_irq;
>>> @@ -139,6 +140,9 @@ static int tfp410_attach(struct drm_bridge *bridge)
>>> return ret;
>>> }
>>>
>>> + drm_display_info_set_bus_formats(&dvi->connector.display_info,
>>> + &dvi->bus_format, 1);
>>> +
>>> drm_connector_attach_encoder(&dvi->connector,
>>> bridge->encoder);
>>>
>>> @@ -197,6 +201,7 @@ static int tfp410_parse_timings(struct tfp410 *dvi,
>>> bool i2c)
>>> struct drm_bridge_timings *timings = &dvi->timings;
>>> struct device_node *ep;
>>> u32 pclk_sample = 0;
>>> + u32 bus_width = 24;
>>> s32 deskew = 0;
>>>
>>> /* Start with defaults. */
>>> @@ -221,6 +226,7 @@ static int tfp410_parse_timings(struct tfp410 *dvi,
>>> bool i2c)
>>>
>>> /* Get the sampling edge from the endpoint. */
>>> of_property_read_u32(ep, "pclk-sample", &pclk_sample);
>>> + of_property_read_u32(ep, "bus-width", &bus_width);
>>> of_node_put(ep);
>>>
>>> timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
>>> @@ -238,6 +244,17 @@ static int tfp410_parse_timings(struct tfp410 *dvi,
>>> bool i2c)
>>> return -EINVAL;
>>> }
>>>
>>> + switch (bus_width) {
>>> + case 12:
>>> + dvi->bus_format = MEDIA_BUS_FMT_RGB888_2X12_LE;
>>> + break;
>>> + case 24:
>>> + dvi->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
>>> + break;
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> /* Get the setup and hold time from vendor-specific properties. */
>>> of_property_read_u32(dvi->dev->of_node, "ti,deskew", (u32 *)&deskew);
>>> if (deskew < -4 || deskew > 3)
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
