From: Wangyan Wang <wangyan.w...@mediatek.com> V8 adopt maintainer's suggestion. Here is the change list between V7 & V8
1. Make title more clear in patch commit message. 2. To make MT2701 HDMI stable, TVDPLL should not be adjusted and it's the parent clock of HDMI phy, so HDMI phy could not adjust parent rate. there are 3 steps to make MT2701 HDMI stable. 1). remove flag CLK_SET_RATE_PARENT for mt2701 hdmi phy to not propagate rate change to parent in "drm/mediatek: remove flag ...". 2). Using new factor for tvdpll in mt2701 to match divider of DPI in mt2701 in "drm/mediatek: using new...". 3). No change parent rate in round_rate() for mt2701 hdmi phy in "drm/mediatek: no change parent...". 3. Recalculate the rate of this clock, by querying hardware to make implementation of recalc_rate() to match the definition. Wangyan Wang (5): drm/mediatek: remove flag CLK_SET_RATE_PARENT for mt2701 hdmi phy drm/mediatek: fix the rate and divder of hdmi phy for MT2701 drm/mediatek: using new factor for tvdpll in MT2701 drm/mediatek: no change parent rate in round_rate() for mt2701 hdmi phy drm/mediatek: make implementation of recalc_rate() to match the definition drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++--- drivers/gpu/drm/mediatek/mtk_hdmi_phy.c | 35 +++--------------- drivers/gpu/drm/mediatek/mtk_hdmi_phy.h | 5 +-- drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 50 ++++++++++++++++++++++---- drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 23 ++++++++++++ 5 files changed, 76 insertions(+), 45 deletions(-) -- 2.14.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel