On Wed, 27 Mar 2019 12:26:07 +0100
Daniel Vetter <dan...@ffwll.ch> wrote:
> On Wed, Mar 27, 2019 at 10:59:16AM +0100, Boris Brezillon wrote:
> > Document TV connector props and get rid of the according entries in
> > the csv file.
> >
> > Signed-off-by: Boris Brezillon <boris.brezil...@collabora.com>
> > ---
> > Documentation/gpu/drm-kms.rst | 6 +++
> > Documentation/gpu/kms-properties.csv | 13 -------
> > drivers/gpu/drm/drm_connector.c | 56 ++++++++++++++++++++++++++++
> > 3 files changed, 62 insertions(+), 13 deletions(-)
> >
> > diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
> > index 23a3c986ef6d..376f88e56d14 100644
> > --- a/Documentation/gpu/drm-kms.rst
> > +++ b/Documentation/gpu/drm-kms.rst
> > @@ -449,6 +449,12 @@ HDMI Specific Connector Properties
> > .. kernel-doc:: drivers/gpu/drm/drm_connector.c
> > :doc: HDMI connector properties
> >
> > +TV Connector Properties
> > +-----------------------
> > +
> > +.. kernel-doc:: drivers/gpu/drm/drm_connector.c
> > + :doc: TV connector properties
> > +
> > Plane Composition Properties
> > ----------------------------
> >
> > diff --git a/Documentation/gpu/kms-properties.csv
> > b/Documentation/gpu/kms-properties.csv
> > index 07ed22ea3bd6..1a8277f3028d 100644
> > --- a/Documentation/gpu/kms-properties.csv
> > +++ b/Documentation/gpu/kms-properties.csv
> > @@ -1,19 +1,6 @@
> > Owner Module/Drivers,Group,Property Name,Type,Property Values,Object
> > attached,Description/Restrictions
> > ,DVI-I,“subconnector”,ENUM,"{ “Unknown”, “DVI-D”, “DVI-A” }",Connector,TBD
> > ,,“select subconnector”,ENUM,"{ “Automatic”, “DVI-D”, “DVI-A”
> > }",Connector,TBD
> > -,TV,“subconnector”,ENUM,"{ ""Unknown"", ""Composite"", ""SVIDEO"",
> > ""Component"", ""SCART"" }",Connector,TBD
> > -,,“select subconnector”,ENUM,"{ ""Automatic"", ""Composite"", ""SVIDEO"",
> > ""Component"", ""SCART"" }",Connector,TBD
> > -,,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" }
> > etc.",Connector,TBD
> > -,,“left margin”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“right margin”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“top margin”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“bottom margin”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“brightness”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“contrast”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“flicker reduction”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“overscan”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“saturation”,RANGE,"Min=0, Max=100",Connector,TBD
> > -,,“hue”,RANGE,"Min=0, Max=100",Connector,TBD
> > ,Virtual GPU,“suggested X”,RANGE,"Min=0,
> > Max=0xffffffff",Connector,property to suggest an X offset for a connector
> > ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to
> > suggest an Y offset for a connector
> > ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9""
> > }",Connector,TDB
> > diff --git a/drivers/gpu/drm/drm_connector.c
> > b/drivers/gpu/drm/drm_connector.c
> > index 95dfb322b14e..bb581994b48e 100644
> > --- a/drivers/gpu/drm/drm_connector.c
> > +++ b/drivers/gpu/drm/drm_connector.c
> > @@ -1249,6 +1249,62 @@ int drm_mode_create_tv_margin_properties(struct
> > drm_device *dev)
> > }
> > EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
> >
> > +/**
> > + * DOC: TV connector properties
> > + *
> > + * subconnector:
> > + * Subconnector can be Composite, SVIDEO, Component or SCART. For legacy
> > + * reasons we have two properties, one to select the subconnector and one
> > + * showing the currently selected subconnector.
> > + *
> > + * select subconnector:
> > + * Select a subconnector type. There's an 'Automatic' value to let
> > + * DRM select the subconnector automatically
> > + *
> > + * subconnector:
> > + * Shows the currently selected subconnector
>
> There's also subconnector values for DVI-D vs. DVI-I on some drivers. Not
> sure we want to include these here though ...
I'm documenting the TV connector props here. Maybe I should move that
to the "standard connector properties"...
>
> > + *
> > + * margins:
> > + * Defines invisible area of a screen so that the CRTC driver can possibly
> > + * scale the output image and move it to make it entirely visible. All
> > + * margins are defined in pixels and the valid range is 0 - 100.
> > + *
> > + * left margin:
> > + * Left margin
> > + *
> > + * right margin:
> > + * Left margin
> > + *
> > + * top margin:
> > + * Top margin
> > + *
> > + * bottom margin:
> > + * Bottom margin
>
> This feels redundant with the margins text in patch 1. I think better to
> remove.
Problem is, the margin props were documented in the HDMI connector
props section. If we want to make it applicable to both HDMI and TV
connectors I should move it to the "standard connector properties"
section and mention that these props only apply to HDMI and TV
connectors.
>
> > + *
> > + * mode:
> > + * Exposes all supported TV modes and allows one to select a mode. The
> > + * list of supported modes is driver dependent, but you should basically
> > + * find one or more variants of the PAL and NTSC standards.
> > + *
> > + * brightness:
> > + * Brigthness settings expressed in percent
> > + *
> > + * contrast:
> > + * Contrast settings expressed in percent
> > + *
> > + * flicker reduction:
> > + * Flicker reduction settings expressed in percent
> > + *
> > + * overscan:
> > + * Overscan settings
> > + *
> > + * saturation:
> > + * Saturation settings expressed in percent
> > + *
> > + * hue:
> > + * Hue settings expressed in percent
> > + */
>
> Not sure we want to sprinkle the usual set of references to create/attach
> functions. Probably overkill, up to you.
>
> With the redundant margins section removed:
>
> Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
>
> > +
> > /**
> > * drm_mode_create_tv_properties - create TV specific connector properties
> > * @dev: DRM device
> > --
> > 2.20.1
> >
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
