Amlogic G12A SoC supports the same set of Video Planes, but now
are handled by the new OSD plane blender module.
This patch uses the same VD1 plane for G12A, using the exact same scaler
and VD11 setup registers, except using the new blender register to
disable the plane.
Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
drivers/gpu/drm/meson/meson_overlay.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_overlay.c
b/drivers/gpu/drm/meson/meson_overlay.c
index b54a22e483b9..bdbf925ff3e8 100644
--- a/drivers/gpu/drm/meson/meson_overlay.c
+++ b/drivers/gpu/drm/meson/meson_overlay.c
@@ -516,8 +516,14 @@ static void meson_overlay_atomic_disable(struct drm_plane
*plane,
priv->viu.vd1_enabled = false;
/* Disable VD1 */
- writel_bits_relaxed(VPP_VD1_POSTBLEND | VPP_VD1_PREBLEND, 0,
- priv->io_base + _REG(VPP_MISC));
+ if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ writel_relaxed(0, priv->io_base + _REG(VD1_BLEND_SRC_CTRL));
+ writel_relaxed(0, priv->io_base + _REG(VD2_BLEND_SRC_CTRL));
+ writel_relaxed(0, priv->io_base + _REG(VD1_IF0_GEN_REG +
0x17b0));
+ writel_relaxed(0, priv->io_base + _REG(VD2_IF0_GEN_REG +
0x17b0));
+ } else
+ writel_bits_relaxed(VPP_VD1_POSTBLEND | VPP_VD1_PREBLEND, 0,
+ priv->io_base + _REG(VPP_MISC));
}
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
