The driver has a loop after ending link training, where it reads the
DPCD link status and prints an error if that status is not ok.
The loop is unnecessary, as far as I can understand from DP specs, so
let's remove it. We can also print the more specific errors to help
debugging.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
drivers/gpu/drm/bridge/tc358767.c | 62 +++++++++++++++++--------------
1 file changed, 35 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c
b/drivers/gpu/drm/bridge/tc358767.c
index 700e161015af..220408db82f7 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -968,34 +968,42 @@ static int tc_main_link_enable(struct tc_data *tc)
if (ret < 0)
goto err_dpcd_write;
- /* Wait */
- timeout = 100;
- do {
- udelay(1);
- /* Read DPCD 0x202-0x207 */
- ret = drm_dp_dpcd_read_link_status(aux, tmp + 2);
- if (ret < 0)
- goto err_dpcd_read;
- } while ((--timeout) &&
- !(drm_dp_channel_eq_ok(tmp + 2, tc->link.base.num_lanes)));
+ /* Check link status */
+ ret = drm_dp_dpcd_read_link_status(aux, tmp);
+ if (ret < 0)
+ goto err_dpcd_read;
- if (timeout == 0) {
- /* Read DPCD 0x200-0x201 */
- ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT, tmp, 2);
- if (ret < 0)
- goto err_dpcd_read;
- dev_err(dev, "channel(s) EQ not ok\n");
- dev_info(dev, "0x0200 SINK_COUNT: 0x%02x\n", tmp[0]);
- dev_info(dev, "0x0201 DEVICE_SERVICE_IRQ_VECTOR: 0x%02x\n",
- tmp[1]);
- dev_info(dev, "0x0202 LANE0_1_STATUS: 0x%02x\n", tmp[2]);
- dev_info(dev, "0x0204 LANE_ALIGN_STATUS_UPDATED: 0x%02x\n",
- tmp[4]);
- dev_info(dev, "0x0205 SINK_STATUS: 0x%02x\n", tmp[5]);
- dev_info(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
- tmp[6]);
-
- return -EAGAIN;
+ ret = 0;
+
+ value = tmp[0] & DP_CHANNEL_EQ_BITS;
+
+ if (value != DP_CHANNEL_EQ_BITS) {
+ dev_err(tc->dev, "Lane 0 failed: %x\n", value);
+ ret = -ENODEV;
+ }
+
+ if (tc->link.base.num_lanes == 2) {
+ value = (tmp[0] >> 4) & DP_CHANNEL_EQ_BITS;
+
+ if (value != DP_CHANNEL_EQ_BITS) {
+ dev_err(tc->dev, "Lane 1 failed: %x\n", value);
+ ret = -ENODEV;
+ }
+
+ if (!(tmp[2] & DP_INTERLANE_ALIGN_DONE)) {
+ dev_err(tc->dev, "Interlane align failed\n");
+ ret = -ENODEV;
+ }
+ }
+
+ if (ret) {
+ dev_err(dev, "0x0202 LANE0_1_STATUS: 0x%02x\n",
tmp[0]);
+ dev_err(dev, "0x0203 LANE2_3_STATUS 0x%02x\n",
tmp[1]);
+ dev_err(dev, "0x0204 LANE_ALIGN_STATUS_UPDATED: 0x%02x\n",
tmp[2]);
+ dev_err(dev, "0x0205 SINK_STATUS: 0x%02x\n",
tmp[3]);
+ dev_err(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
tmp[4]);
+ dev_err(dev, "0x0207 ADJUST_REQUEST_LANE2_3: 0x%02x\n",
tmp[5]);
+ goto err;
}
return 0;
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
