Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.

Fix those

Signed-off-by: Maxime Ripard <maxime.rip...@bootlin.com>
---
 arch/arm/boot/dts/sun5i-a13-olinuxino.dts |  2 --
 arch/arm/boot/dts/sun5i-a13-q8-tablet.dts | 11 ++---------
 2 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts 
b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 9409c232d48a..54ca140fc258 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -74,8 +74,6 @@
 
        bridge {
                compatible = "dumb-vga-dac";
-               #address-cells = <1>;
-               #size-cells = <0>;
 
                ports {
                        #address-cells = <1>;
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts 
b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
index 7257f39b31ce..fde559a8b61e 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -53,16 +53,9 @@
                power-supply = <&reg_vcc3v3>;
                enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
                backlight = <&backlight>;
-               #address-cells = <1>;
-               #size-cells = <0>;
 
-               port@0 {
-                       reg = <0>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       panel_input: endpoint@0 {
-                               reg = <0>;
+               port {
+                       panel_input: endpoint {
                                remote-endpoint = <&tcon0_out_lcd>;
                        };
                };
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to