Hi Laurent,
On 13/03/2019 00:05, Laurent Pinchart wrote:
> Refactor the display list header setup to allow chained display lists
> with display pipelines. Chain the display lists as for mem-to-mem
> pipelines, but enable the frame end interrupt for every list as display
> pipelines have a single list per frame.
>
> This feature will be used to disable writeback exactly one frame after
> enabling it by chaining a writeback disable display list.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
This is a bit hard to grok, but I can see that the key change is now
continuous display pipelines can go into the code path which sets the
vsp1_dl_list *next. The rest of the refactoring looks good too.
Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
> ---
> drivers/media/platform/vsp1/vsp1_dl.c | 35 ++++++++++++++++++---------
> 1 file changed, 23 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_dl.c
> b/drivers/media/platform/vsp1/vsp1_dl.c
> index 886b3a69d329..ed7cda4130f2 100644
> --- a/drivers/media/platform/vsp1/vsp1_dl.c
> +++ b/drivers/media/platform/vsp1/vsp1_dl.c
> @@ -770,17 +770,35 @@ static void vsp1_dl_list_fill_header(struct
> vsp1_dl_list *dl, bool is_last)
> }
>
> dl->header->num_lists = num_lists;
> + dl->header->flags = 0;
>
> - if (!list_empty(&dl->chain) && !is_last) {
> + /*
> + * Enable the interrupt for the end of each frame. In continuous mode
> + * chained lists are used with one list per frame, so enable the
> + * interrupt for each list. In singleshot mode chained lists are used
> + * to partition a single frame, so enable the interrupt for the last
> + * list only.
> + */
> + if (!dlm->singleshot || is_last)
> + dl->header->flags |= VSP1_DLH_INT_ENABLE;
> +
> + /*
> + * In continuous mode enable auto-start for all lists, as the VSP must
> + * loop on the same list until a new one is queued. In singleshot mode
> + * enable auto-start for all lists but the last to chain processing of
> + * partitions without software intervention.
> + */
> + if (!dlm->singleshot || !is_last)
> + dl->header->flags |= VSP1_DLH_AUTO_START;
> +
> + if (!is_last) {
> /*
> - * If this display list's chain is not empty, we are on a list,
> - * and the next item is the display list that we must queue for
> - * automatic processing by the hardware.
> + * If this is not the last display list in the chain, queue the
> + * next item for automatic processing by the hardware.
> */
> struct vsp1_dl_list *next = list_next_entry(dl, chain);
>
> dl->header->next_header = next->dma;
> - dl->header->flags = VSP1_DLH_AUTO_START;
> } else if (!dlm->singleshot) {
> /*
> * if the display list manager works in continuous mode, the VSP
> @@ -788,13 +806,6 @@ static void vsp1_dl_list_fill_header(struct vsp1_dl_list
> *dl, bool is_last)
> * instructed to do otherwise.
> */
> dl->header->next_header = dl->dma;
> - dl->header->flags = VSP1_DLH_INT_ENABLE | VSP1_DLH_AUTO_START;
> - } else {
> - /*
> - * Otherwise, in mem-to-mem mode, we work in single-shot mode
> - * and the next display list must not be started automatically.
> - */
> - dl->header->flags = VSP1_DLH_INT_ENABLE;
> }
>
> if (!dl->extension)
>
--
Regards
--
Kieran
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
