Hi,
On 19/01/2019 20:21, Andreas Kemnade wrote:
> This panel has a backlight, so fetch it from devicetree using the
> as documented in panel-common.txt. It is implemented the same way as in
Extra words above, or maybe some are missing...
> panel-dpi.c
> This ensures the backlight is also disabled when the display is
> turned off like when doing xset dpms force off.
>
> Signed-off-by: Andreas Kemnade <andr...@kemnade.info>
> ---
> .../gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c | 18
> +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
> b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
> index 7ddc8c574a61..f326ba9dcf62 100644
> --- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
> +++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
> @@ -35,6 +35,8 @@ struct panel_drv_data {
>
> struct videomode vm;
>
> + struct backlight_device *backlight;
> +
> struct spi_device *spi_dev;
> };
>
> @@ -268,6 +270,8 @@ static int td028ttec1_panel_enable(struct omap_dss_device
> *dssdev)
>
> r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
>
> + backlight_enable(ddata->backlight);
> +
> dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
>
> transfer_err:
> @@ -283,6 +287,8 @@ static void td028ttec1_panel_disable(struct
> omap_dss_device *dssdev)
> if (!omapdss_device_is_enabled(dssdev))
> return;
>
> + backlight_disable(ddata->backlight);
> +
> dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
>
> jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
> @@ -321,6 +327,15 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
>
> dev_dbg(&spi->dev, "%s\n", __func__);
>
> + ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
> + if (ddata == NULL)
> + return -ENOMEM;
> +
> + ddata->backlight = devm_of_find_backlight(&spi->dev);
> +
> + if (IS_ERR(ddata->backlight))
> + return PTR_ERR(ddata->backlight);
> +
Is there a reason for moving the ddata alloc here, instead of keeping it
where it was?
> spi->bits_per_word = 9;
> spi->mode = SPI_MODE_3;
>
> @@ -330,9 +345,6 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
> return r;
> }
>
> - ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
> - if (ddata == NULL)
> - return -ENOMEM;
>
This leaves an extra empty line here.
> dev_set_drvdata(&spi->dev, ddata);
>
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
