On Fri, 2018-10-05 at 17:11 +0200, Philipp Zabel wrote:
> On Fri, 2018-09-14 at 18:59 +0200, Lucas Stach wrote:
> > Currently there is a small race window where we could manage to arm the
> > vblank event from atomic flush, but programming the hardware was too close
> > to the frame end, so the hardware will only apply the current state on the
> > next vblank. In this case we will send out the commit done event too early
> > causing userspace to reuse framebuffes that are still in use.
> >
> > Instead of using the event arming mechnism, just remember the pending event
> > and send it from the vblank IRQ handler, once we are sure that all state
> > has been applied sucessfully.
> >
> > Signed-off-by: Lucas Stach <l.st...@pengutronix.de>
> > ---
> > drivers/gpu/drm/imx/ipuv3-crtc.c | 32 ++++++++++++++++++++++++++++----
> > 1 file changed, 28 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c
> > b/drivers/gpu/drm/imx/ipuv3-crtc.c
> > index 7d4b710b837a..b0c95565a28d 100644
> > --- a/drivers/gpu/drm/imx/ipuv3-crtc.c
> > +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
> > @@ -42,6 +42,7 @@ struct ipu_crtc {
> > struct ipu_dc *dc;
> > struct ipu_di *di;
> > int irq;
> > + struct drm_pending_vblank_event *event;
> > };
> >
> > static inline struct ipu_crtc *to_ipu_crtc(struct drm_crtc *crtc)
> > @@ -181,8 +182,31 @@ static const struct drm_crtc_funcs ipu_crtc_funcs = {
> > static irqreturn_t ipu_irq_handler(int irq, void *dev_id)
> > {
> > struct ipu_crtc *ipu_crtc = dev_id;
> > + struct drm_crtc *crtc = &ipu_crtc->base;
> > + unsigned long flags;
> > + int i;
> > +
> > + drm_crtc_handle_vblank(crtc);
> > +
> > + if (ipu_crtc->event) {
> > + for (i = 0; i < ARRAY_SIZE(ipu_crtc->plane); i++) {
> > + struct ipu_plane *plane = ipu_crtc->plane[i];
> > +
> > + if (!plane)
> > + continue;
> > +
> > + if (!ipu_plane_atomic_update_done(&plane->base))
>
> if (ipu_plane_atomic_update_pending(&plane->base))
>
> > + break;
> > + }
> >
> > - drm_crtc_handle_vblank(&ipu_crtc->base);
> > + if (i == ARRAY_SIZE(ipu_crtc->plane)) {
> > + spin_lock_irqsave(&crtc->dev->event_lock, flags);
> > + drm_crtc_send_vblank_event(crtc, ipu_crtc->event);
> > + ipu_crtc->event = NULL;
>
> These two happen under the event spinlock, but where event is set in
> ipu_crtc_atomic_flush, the locking is removed.
>
> > + drm_crtc_vblank_put(crtc);
> > + spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
> > + }
> > + }
> >
> > return IRQ_HANDLED;
> > }
> > @@ -229,13 +253,13 @@ static void ipu_crtc_atomic_begin(struct drm_crtc
> > *crtc,
> > static void ipu_crtc_atomic_flush(struct drm_crtc *crtc,
> > struct drm_crtc_state *old_crtc_state)
> > {
> > - spin_lock_irq(&crtc->dev->event_lock);
> > + struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
> > +
> > if (crtc->state->event) {
> > WARN_ON(drm_crtc_vblank_get(crtc));
> > - drm_crtc_arm_vblank_event(crtc, crtc->state->event);
> > + ipu_crtc->event = crtc->state->event;
>
> We assume here that ipu_crtc->event is NULL and the irq handler is never
> running at the same time, otherwise we would drop an event. This is non-
> obvious to me, and I think it warrants a comment.
>
> My understanding is the following:
>
> - It is virtually impossible for atomic_flush to race against a delayed
> previous ipu_irq_handler because the previous commit's commit_tail
> would still be waiting for the vblank event to release it from
> drm_atomic_helper_wait_for_flip_done.
>
> However, if the last commit's tail finishes after the irq_handler
> calls drm_crtc_send_vblank_event(), and the new commit is issued, and
> its tail work scheduled, all before the next line in the irq_handler,
> ipu_crtc->event = NULL, then the new commit's tail could call
> drm_atomic_helper_commit_planes and therefore ipu_crtc_atomic_flush
> and ipu_crtc->event would be overwritten.
>
> - It is unproblematic for a delayed atomic_flush to race against the
> next ipu_irq_handler because ipu_crtc->event will just not be set
> when the irq handler checks it, and the vblank event will be deferred
> to the next interrupt.
How do we proceed with this? Keep the spin lock?
regards
Philipp
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
