The H and V syncs of the DP output are always set to active high. This
patch fixes the syncs by configuring them according to the videomode.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
Reviewed-by: Andrzej Hajda <a.ha...@samsung.com>
---
drivers/gpu/drm/bridge/tc358767.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c
b/drivers/gpu/drm/bridge/tc358767.c
index a1f3dd2afbb1..391547358756 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -98,6 +98,8 @@
#define DP0_STARTVAL 0x064c
#define DP0_ACTIVEVAL 0x0650
#define DP0_SYNCVAL 0x0654
+#define SYNCVAL_HS_POL_ACTIVE_LOW (1 << 15)
+#define SYNCVAL_VS_POL_ACTIVE_LOW (1 << 31)
#define DP0_MISC 0x0658
#define TU_SIZE_RECOMMENDED (63) /* LSCLK cycles per TU */
#define BPC_6 (0 << 5)
@@ -726,7 +728,9 @@ static int tc_set_video_mode(struct tc_data *tc, struct
drm_display_mode *mode)
tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
- tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
+ tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
+ ((mode->flags & DRM_MODE_FLAG_NHSYNC) ?
SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
+ ((mode->flags & DRM_MODE_FLAG_NVSYNC) ?
SYNCVAL_VS_POL_ACTIVE_LOW : 0));
tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
