This makes it possible to choose a different pixel format for the
endpoint. Modelled after what other LCD controllers use, including
marvell,pxa2xx-lcdc and atmel,hlcdc-display-controller and perhaps more.
Signed-off-by: Lubomir Rintel <lkund...@v3.sk>
---
drivers/gpu/drm/armada/armada_crtc.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/armada/armada_crtc.c
b/drivers/gpu/drm/armada/armada_crtc.c
index da9360688b55..5400fb925bcd 100644
--- a/drivers/gpu/drm/armada/armada_crtc.c
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@@ -724,6 +724,8 @@ static int armada_drm_crtc_create(struct drm_device *drm,
struct device *dev,
struct armada_private *priv = drm->dev_private;
struct armada_crtc *dcrtc;
struct drm_plane *primary;
+ struct device_node *endpoint;
+ u32 bus_width = 24;
void __iomem *base;
int ret;
@@ -744,8 +746,30 @@ static int armada_drm_crtc_create(struct drm_device *drm,
struct device *dev,
dcrtc->base = base;
dcrtc->num = drm->mode_config.num_crtc;
dcrtc->clk = ERR_PTR(-EINVAL);
- dcrtc->cfg_dumb_ctrl = DUMB24_RGB888_0;
dcrtc->spu_iopad_ctrl = CFG_VSCALE_LN_EN | CFG_IOPAD_DUMB24;
+
+ endpoint = of_get_next_child(port, NULL);
+ of_property_read_u32(endpoint, "bus-width", &bus_width);
+ of_node_put(endpoint);
+
+ switch (bus_width) {
+ case 12:
+ dcrtc->cfg_dumb_ctrl = DUMB12_RGB444_0;
+ break;
+ case 16:
+ dcrtc->cfg_dumb_ctrl = DUMB16_RGB565_0;
+ break;
+ case 18:
+ dcrtc->cfg_dumb_ctrl = DUMB18_RGB666_0;
+ break;
+ case 24:
+ dcrtc->cfg_dumb_ctrl = DUMB24_RGB888_0;
+ break;
+ default:
+ DRM_ERROR("unsupported bus width: %d\n", bus_width);
+ return -EINVAL;
+ }
+
spin_lock_init(&dcrtc->irq_lock);
dcrtc->irq_ena = CLEAN_SPU_IRQ_ISR;
--
2.19.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
