The GOP sometimes initializes the DSI pclk at a (slightly) different freq
then the pclk which we pick. intel_pipe_config_compare() allows for this
by doing a fuzzy compare on the port_clock.
But the pclk difference not only results in the port_clock and
base.adjusted_mode.crtc_clock clocks being a bit different, but also in
us picking different dsi_pll register values matching the different pclk.
This commit makes us only do the dsi_pll register compare when the adjust
parameter is false, so only from verify_crtc_state(), so that we correctly
do a fast modeset at boot avoiding the screen going black for about 1 sec.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
drivers/gpu/drm/i915/intel_display.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index b219d5858160..82fa85df0fba 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11759,8 +11759,10 @@ intel_pipe_config_compare(struct drm_i915_private
*dev_priv,
PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_bias);
PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_tdc_coldst_bias);
- PIPE_CONF_CHECK_X(dsi_pll.ctrl);
- PIPE_CONF_CHECK_X(dsi_pll.div);
+ if (!adjust) {
+ PIPE_CONF_CHECK_X(dsi_pll.ctrl);
+ PIPE_CONF_CHECK_X(dsi_pll.div);
+ }
if (IS_G4X(dev_priv) || INTEL_GEN(dev_priv) >= 5)
PIPE_CONF_CHECK_I(pipe_bpp);
--
2.19.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
