On Fri, Oct 26, 2018 at 08:13:35PM +0530, Jagan Teki wrote:
> Some boards have VCC-DSI pin connected to voltage regulator which may
> not be turned on by default.
> 
> Add support for such boards by adding voltage regulator handling code to
> MIPI DSI driver.
> 
> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> Tested-by: Jagan Teki <ja...@amarulasolutions.com>
> ---
> Changes for v3:
> - new patch
> Changes for v2:
> - none
> 
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++++++++
>  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h |  3 +++
>  2 files changed, 17 insertions(+)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c 
> b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 42bd7506abaf..bc57343592e0 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -949,6 +949,12 @@ static int sun6i_dsi_bind(struct device *dev, struct 
> device *master,
>  
>       dsi->drv = drv;
>  
> +     ret = regulator_enable(dsi->regulator);
> +     if (ret) {
> +             dev_err(dev, "Failed to enable regulator\n");
> +             return ret;
> +     }
> +

The regulator should be enabled only when the device is in use.

>       drm_encoder_helper_add(&dsi->encoder,
>                              &sun6i_dsi_enc_helper_funcs);
>       ret = drm_encoder_init(drm,
> @@ -980,6 +986,7 @@ static int sun6i_dsi_bind(struct device *dev, struct 
> device *master,
>  
>  err_cleanup_connector:
>       drm_encoder_cleanup(&dsi->encoder);
> +     regulator_disable(dsi->regulator);
>       return ret;
>  }
>  
> @@ -989,6 +996,7 @@ static void sun6i_dsi_unbind(struct device *dev, struct 
> device *master,
>       struct sun6i_dsi *dsi = dev_get_drvdata(dev);
>  
>       drm_panel_detach(dsi->panel);
> +     regulator_disable(dsi->regulator);
>  }
>  
>  static const struct component_ops sun6i_dsi_ops = {
> @@ -1022,6 +1030,12 @@ static int sun6i_dsi_probe(struct platform_device 
> *pdev)
>               return PTR_ERR(base);
>       }
>  
> +     dsi->regulator = devm_regulator_get(dev, "vcc-dsi");
> +     if (IS_ERR(dsi->regulator)) {
> +             dev_err(dev, "Couldn't get regulator\n");
> +             return PTR_ERR(dsi->regulator);
> +     }
> +

You haven't updated the DT bindings accordingly.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to