A separate power well 2 (PG2) is required for VDSC on eDP transcoder
whereas all other transcoders use the power wells associated with the
transcoders for VDSC.
This patch adds a helper to obtain correct power domain depending on
transcoder being used and enables/disables the power wells during
VDSC enabling/disabling.
v2:
* Fix tabs, const crtc_state, fix comments (Ville)
Suggested-by: Ville Syrjala <ville.syrj...@linux.intel.com>
Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
Cc: Imre Deak <imre.d...@intel.com>
Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_vdsc.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_vdsc.c
b/drivers/gpu/drm/i915/intel_vdsc.c
index 5e76b4a44d90..0fed36e2491a 100644
--- a/drivers/gpu/drm/i915/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/intel_vdsc.c
@@ -581,6 +581,24 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
return 0;
}
+static enum intel_display_power_domain
+intel_dsc_get_power_domains(const struct intel_crtc_state *crtc_state)
+{
+ enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+
+ /*
+ * On ICL VDSC/joining for eDP transcoder uses a separate power well PW2
+ * This requires POWER_DOMAIN_TRANSCODER_EDP_VDSC power domain.
+ * For any other transcoder, VDSC/joining uses the power well associated
+ * with the pipe/transcoder in use. Hence another reference on the
+ * transcoder power domain will suffice.
+ */
+ if (cpu_transcoder == TRANSCODER_EDP)
+ return POWER_DOMAIN_TRANSCODER_EDP_VDSC;
+ else
+ return POWER_DOMAIN_TRANSCODER(cpu_transcoder);
+}
+
static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,
struct intel_crtc_state
*crtc_state)
{
@@ -1020,6 +1038,10 @@ void intel_dsc_enable(struct intel_encoder *encoder,
if (!crtc_state->dsc_params.compression_enable)
return;
+ /* Enable Power wells for VDSC/joining */
+ intel_display_power_get(dev_priv,
+ intel_dsc_get_power_domains(crtc_state));
+
intel_configure_pps_for_dsc_encoder(encoder, crtc_state);
intel_dp_send_dsc_pps_sdp(encoder, crtc_state);
@@ -1074,4 +1096,8 @@ void intel_dsc_disable(struct intel_encoder *encoder,
RIGHT_BRANCH_VDSC_ENABLE);
I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
+ /* Disable Power wells for VDSC/joining */
+ intel_display_power_put(dev_priv,
+ intel_dsc_get_power_domains(old_crtc_state));
+
}
--
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
