The LCDC IP used by some Atmel SOC's have a
multifunction device that include two sub-devices:
- pwm
- display controller

This driver add support for the pwm sub-device
exposing a single PWM device that can be used
for backlight.

The driver is based on the pwm-atmel-hlcdc driver.

Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
Cc: Thierry Reding <thierry.red...@gmail.com>
Cc: Boris Brezillon <boris.brezil...@free-electrons.com>
---
 drivers/pwm/Kconfig          |  13 ++++
 drivers/pwm/Makefile         |   1 +
 drivers/pwm/pwm-atmel-lcdc.c | 178 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 192 insertions(+)
 create mode 100644 drivers/pwm/pwm-atmel-lcdc.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index a4d262db9945..3976c1840778 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -62,6 +62,19 @@ config PWM_ATMEL_HLCDC_PWM
          To compile this driver as a module, choose M here: the module
          will be called pwm-atmel-hlcdc.
 
+config PWM_ATMEL_LCDC_PWM
+       tristate "Atmel LCDC PWM support"
+       depends on MFD_ATMEL_LCDC
+       depends on HAVE_CLK
+       help
+         Generic PWM framework driver for the PWM output of the LCDC
+         (Atmel LCD Controller). This PWM output is mainly used
+         to control the LCD backlight.
+         The Atmel LCD Controller is found in the at91sam9x family.
+
+         To compile this driver as a module, choose M here: the module
+         will be called pwm-atmel-lcdc.
+
 config PWM_ATMEL_TCB
        tristate "Atmel TC Block PWM support"
        depends on ATMEL_TCLIB && OF
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 9c676a0dadf5..85d884cb0977 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_PWM_SYSFS)         += sysfs.o
 obj-$(CONFIG_PWM_AB8500)       += pwm-ab8500.o
 obj-$(CONFIG_PWM_ATMEL)                += pwm-atmel.o
 obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)      += pwm-atmel-hlcdc.o
+obj-$(CONFIG_PWM_ATMEL_LCDC_PWM)       += pwm-atmel-lcdc.o
 obj-$(CONFIG_PWM_ATMEL_TCB)    += pwm-atmel-tcb.o
 obj-$(CONFIG_PWM_BCM_IPROC)    += pwm-bcm-iproc.o
 obj-$(CONFIG_PWM_BCM_KONA)     += pwm-bcm-kona.o
diff --git a/drivers/pwm/pwm-atmel-lcdc.c b/drivers/pwm/pwm-atmel-lcdc.c
new file mode 100644
index 000000000000..3d528e75cf9f
--- /dev/null
+++ b/drivers/pwm/pwm-atmel-lcdc.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Sam Ravnborg
+ *
+ * Author: Sam Ravnborg <s...@ravnborg.org>
+ *
+ * PWM embedded in the LCD Controller.
+ * A sub-device of the Atmel LCDC driver.
+ *
+ * Based on pwm-atmel-hlcdc which is:
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ * Author: Boris BREZILLON <boris.brezil...@free-electrons.com>
+ */
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/pwm.h>
+
+#include <linux/platform_device.h>
+#include <linux/mfd/atmel-lcdc.h>
+
+struct lcdc_pwm {
+       struct pwm_chip chip;
+       struct atmel_mfd_lcdc *mfd_lcdc;
+};
+
+static inline struct lcdc_pwm *to_lcdc_pwm(struct pwm_chip *chip)
+{
+       return container_of(chip, struct lcdc_pwm, chip);
+}
+
+static int lcdc_pwm_apply(struct pwm_chip *pwm_chip, struct pwm_device *pwm,
+                         struct pwm_state *state)
+{
+       struct lcdc_pwm *chip;
+       int contrast_ctr;
+       int contrast_val;
+       int ret;
+
+       chip = to_lcdc_pwm(pwm_chip);
+
+       if (state->enabled) {
+               contrast_val = pwm_get_relative_duty_cycle(state,
+                                                          ATMEL_LCDC_CVAL);
+               ret = regmap_write(chip->mfd_lcdc->regmap,
+                                  ATMEL_LCDC_CONTRAST_VAL, contrast_val);
+               if (ret)
+                       return ret;
+
+               contrast_ctr = ATMEL_LCDC_ENA_PWMENABLE | ATMEL_LCDC_PS_DIV8;
+               if (state->polarity == PWM_POLARITY_NORMAL)
+                       contrast_ctr |= ATMEL_LCDC_POL_POSITIVE;
+               else
+                       contrast_ctr |= ATMEL_LCDC_POL_NEGATIVE;
+
+               ret = regmap_write(chip->mfd_lcdc->regmap,
+                                  ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
+       } else {
+               contrast_ctr = ATMEL_LCDC_ENA_PWMDISABLE;
+               ret = regmap_write(chip->mfd_lcdc->regmap,
+                                  ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
+       }
+
+       return ret;
+}
+
+static const struct pwm_ops lcdc_pwm_ops = {
+       .apply = lcdc_pwm_apply,
+       .owner = THIS_MODULE,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int lcdc_pwm_suspend(struct device *dev)
+{
+       struct lcdc_pwm *chip = dev_get_drvdata(dev);
+
+       /* Keep the lcdc clock enabled if the PWM is still running. */
+       if (pwm_is_enabled(&chip->chip.pwms[0]))
+               clk_disable_unprepare(chip->mfd_lcdc->lcdc_clk);
+
+       return 0;
+}
+
+static int lcdc_pwm_resume(struct device *dev)
+{
+       struct lcdc_pwm *chip = dev_get_drvdata(dev);
+       struct pwm_state state;
+       int ret;
+
+       pwm_get_state(&chip->chip.pwms[0], &state);
+
+       /* Re-enable the lcdc clock if it was stopped during suspend. */
+       if (!state.enabled) {
+               ret = clk_prepare_enable(chip->mfd_lcdc->lcdc_clk);
+               if (ret)
+                       return ret;
+       }
+
+       return lcdc_pwm_apply(&chip->chip, &chip->chip.pwms[0], &state);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lcdc_pwm_pm_ops,
+                        lcdc_pwm_suspend, lcdc_pwm_resume);
+
+static int lcdc_pwm_probe(struct platform_device *pdev)
+{
+       struct atmel_mfd_lcdc *mfd_lcdc;
+       struct lcdc_pwm *chip;
+       struct device *dev;
+       int ret;
+
+       dev = &pdev->dev;
+       mfd_lcdc = dev_get_drvdata(dev->parent);
+
+       chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+       if (!chip)
+               return -ENOMEM;
+
+       ret = clk_prepare_enable(mfd_lcdc->lcdc_clk);
+       if (ret)
+               return ret;
+
+       chip->mfd_lcdc = mfd_lcdc;
+       chip->chip.ops = &lcdc_pwm_ops;
+       chip->chip.dev = dev;
+       chip->chip.base = -1;
+       chip->chip.npwm = 1;
+       chip->chip.of_xlate = of_pwm_xlate_with_flags;
+       chip->chip.of_pwm_n_cells = 3;
+
+       ret = pwmchip_add_with_polarity(&chip->chip, PWM_POLARITY_INVERSED);
+       if (ret) {
+               clk_disable_unprepare(mfd_lcdc->lcdc_clk);
+               return ret;
+       }
+
+       platform_set_drvdata(pdev, chip);
+
+       return 0;
+}
+
+static int lcdc_pwm_remove(struct platform_device *pdev)
+{
+       struct lcdc_pwm *chip = platform_get_drvdata(pdev);
+       int ret;
+
+       ret = pwmchip_remove(&chip->chip);
+       if (ret)
+               return ret;
+
+       clk_disable_unprepare(chip->mfd_lcdc->lcdc_clk);
+
+       return 0;
+}
+
+static const struct of_device_id lcdc_pwm_dt_ids[] = {
+       { .compatible = "atmel,lcdc-pwm" },
+       { /* sentinel */ },
+};
+
+static struct platform_driver lcdc_pwm_driver = {
+       .driver = {
+               .name = "atmel-lcdc-pwm",
+               .of_match_table = lcdc_pwm_dt_ids,
+               .pm = &lcdc_pwm_pm_ops,
+       },
+       .probe = lcdc_pwm_probe,
+       .remove = lcdc_pwm_remove,
+};
+module_platform_driver(lcdc_pwm_driver);
+
+MODULE_ALIAS("platform:pwm-atmel-lcdc");
+MODULE_AUTHOR("Sam Ravnborg <s...@ravnborg.org>");
+MODULE_DESCRIPTION("Atmel LCDC PWM driver");
+MODULE_LICENSE("GPL v2");
-- 
2.12.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to