The serializer PLL divider is a power-of-two divider, so our calculation
which assumes that it's a numerical divider is incorrect. Replace it
with one that results in a power-of-two divider value instead.
Tested with all supported modes with a Samsung S24C750.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c
b/drivers/gpu/drm/i2c/tda998x_drv.c
index 98ec91a55a6a..a31809ce30e2 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -1334,6 +1334,7 @@ static void tda998x_bridge_mode_set(struct drm_bridge
*bridge,
struct drm_display_mode *adjusted_mode)
{
struct tda998x_priv *priv = bridge_to_tda998x_priv(bridge);
+ unsigned long tmds_clock;
u16 ref_pix, ref_line, n_pix, n_line;
u16 hs_pix_s, hs_pix_e;
u16 vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e;
@@ -1404,12 +1405,19 @@ static void tda998x_bridge_mode_set(struct drm_bridge
*bridge,
(mode->vsync_end - mode->vsync_start)/2;
}
- div = 148500 / mode->clock;
- if (div != 0) {
- div--;
- if (div > 3)
- div = 3;
- }
+ tmds_clock = mode->clock;
+
+ /*
+ * The divisor is power-of-2. The TDA9983B datasheet gives
+ * this as ranges of Msample/s, which is 10x the TMDS clock:
+ * 0 - 800 to 1500 Msample/s
+ * 1 - 400 to 800 Msample/s
+ * 2 - 200 to 400 Msample/s
+ * 3 - as 2 above
+ */
+ for (div = 0; div < 3; div++)
+ if (80000 >> div <= tmds_clock)
+ break;
mutex_lock(&priv->audio_mutex);
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
