On Tue, Jul 24, 2018 at 12:13:35PM +0100, Damian Kos wrote:
> From: Quentin Schulz <quentin.sch...@bootlin.com>
> 
> Signed-off-by: Damian Kos <d...@cadence.com>
> ---
>  .../bindings/display/bridge/cdns,mhdp.txt     | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt 
> b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt
> new file mode 100644
> index 000000000000..dc7be7590048
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.txt
> @@ -0,0 +1,43 @@
> +Cadence MHDP bridge
> +==========================
> +
> +The Cadence MHDP bridge is a DPI to DP bridge.
> +
> +Required properties:
> +- compatible: should be "cdns,mhdp8546",
> +- reg: physical base address and length of the controller's registers,
> +- clocks: DP bridge clock, it's used by the IP to know how to translate
> +     a number of clock cycles into a time (which is used to comply
> +     with DP standard timings and delays),
> +
> +Required subnodes:
> +- ports: Ports as described in Documentation/devictree/bindings/graph.txt
> +     Port 0 - input port representing the VGA bridge input
> +     Port 1 - output port representing the VGA bridge output

VGA?

> +
> +Example:
> +
> +     mhdp: dp-bridge@f0fb000000 {
> +             compatible = "cdns,mhdp8546";
> +             reg = <0xf0 0xfb000000 0x0 0x1000000>;
> +             clocks = <&mhdp_clock>;
> +
> +             ports {
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     port@0 {
> +                             reg = <0>;
> +                             vga_bridge_input: endpoint {
> +                                     remote-endpoint = <&xxx_dpi_output>;
> +                             };
> +                     };
> +
> +                     port@1 {
> +                             reg = <1>;
> +                             vga_bridge_output: endpoint {
> +                                     remote-endpoint = 
> <&xxx_vga_connector_input>;

vga?

> +                             };
> +                     };
> +             };
> +     };
> -- 
> 2.17.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to