Hi Russell,
 
 On mar., juil. 10 2018, Russell King <rmk+ker...@arm.linux.org.uk> wrote:

> Add DT configuration for the HDMI display output on the Dove Cubox.
> This adds support for the LCD0 controller which is connected to a
> TDA19988 HDMI encoder.
>
> Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
> ---
>  arch/arm/boot/dts/dove-cubox.dts | 43 
> ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dove-cubox.dts 
> b/arch/arm/boot/dts/dove-cubox.dts
> index 580e3cbcfbf7..f6dd56f63d09 100644
> --- a/arch/arm/boot/dts/dove-cubox.dts
> +++ b/arch/arm/boot/dts/dove-cubox.dts
> @@ -67,6 +67,25 @@
>       gpu-subsystem {
>               status = "okay";
>       };
> +
> +     reserved-memory {
> +             #address-cells = <1>;
> +             #size-cells = <1>;
> +             ranges;
> +
> +             display_reserved: framebuffer {
> +                     compatible = "marvell,dove-framebuffer";

I didn't find the binding documentation associated to
"marvell,dove-framebuffer".

Could you point me on the accurate file?


> +                     size = <0x02000000>;
> +                     alignment = <0x02000000>;
> +                     no-map;
> +             };
> +     };
> +
> +     display-subsystem {
> +             compatible = "marvell,dove-display-subsystem";

Same for this one.

Thanks,

Gregory

> +             memory-region = <&display_reserved>;
> +             ports = <&lcd0_port>;
> +     };
>  };
>  
>  &uart0 { status = "okay"; };
> @@ -117,6 +136,30 @@
>                       silabs,pll-master;
>               };
>       };
> +
> +     tda998x: hdmi-encoder {
> +             compatible = "nxp,tda998x";
> +             reg = <0x70>;
> +             video-ports = <0x234501>;
> +             interrupts-extended = <&gpio0 27 IRQ_TYPE_LEVEL_LOW>;
> +
> +             port {
> +                     tda998x_video: endpoint {
> +                             remote-endpoint = <&lcd0_rgb>;
> +                     };
> +             };
> +     };
> +};
> +
> +&lcd0 {
> +     status = "okay";
> +     clocks = <&si5351 0>;
> +     clock-names = "ext_ref_clk1";
> +     lcd0_port: port {
> +             lcd0_rgb: endpoint {
> +                     remote-endpoint = <&tda998x_video>;
> +             };
> +     };
>  };
>  
>  &sdio0 {
> -- 
> 2.7.4
>

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to