Hi Sébastien, On Tue, Jul 17, 2018 at 4:23 AM, Sébastien Szymanski <sebastien.szyman...@armadeus.com> wrote: > This patch adds support for the Armadeus ST0700 Adapt. It comes with a > Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so > that it can be connected on the TFT header of Armadeus Dev boards. > > Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com> > --- > .../display/panel/armadeus,st0700-adapt.txt | 9 +++++++ > drivers/gpu/drm/panel/panel-simple.c | 29 > ++++++++++++++++++++++ > 2 files changed, 38 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt > > diff --git > a/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt > b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt > new file mode 100644 > index 000000000000..a30d63db3c8f > --- /dev/null > +++ > b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt > @@ -0,0 +1,9 @@ > +Armadeus ST0700 Adapt. A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with > +an adapter board. > + > +Required properties: > +- compatible: "armadeus,st0700-adapt"
Shouldn't this be named "santek,st0700i5y" instead? Santek is the vendor of the panel and st0700i5y is the model. Then you could add a "santek" entry in Documentation/devicetree/bindings/vendor-prefixes.txt. Regards, Fabio Estevam _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
