From: Deepak Rawat <dra...@vmware.com>
To avoid race condition between update_layout ioctl and modeset ioctl
for access to gui_x/y positioning added a new mutex
requested_layout_mutex.
Also used drm_for_each_connector_iter to iterate over connector list.
Signed-off-by: Deepak Rawat <dra...@vmware.com>
Reviewed-by: Thomas Hellstrom <thellst...@vmware.com>
Signed-off-by: Thomas Hellstrom <thellst...@vmware.com>
---
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 1 +
drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 9 +++++++
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 38 ++++++++++++++++++++---------
3 files changed, 37 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 4f18304226bc..45dfff7733d6 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -644,6 +644,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned
long chipset)
mutex_init(&dev_priv->cmdbuf_mutex);
mutex_init(&dev_priv->release_mutex);
mutex_init(&dev_priv->binding_mutex);
+ mutex_init(&dev_priv->requested_layout_mutex);
mutex_init(&dev_priv->global_kms_state_mutex);
rwlock_init(&dev_priv->resource_lock);
ttm_lock_init(&dev_priv->reservation_sem);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 769d72fabb56..a38318c3efe4 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -411,6 +411,15 @@ struct vmw_private {
uint32_t num_displays;
+ /*
+ * Currently requested_layout_mutex is used to protect the gui
+ * positionig state in display unit. With that use case currently this
+ * mutex is only taken during layout ioctl and atomic check_modeset.
+ * Other display unit state can be protected with this mutex but that
+ * needs careful consideration.
+ */
+ struct mutex requested_layout_mutex;
+
/*
* Framebuffer info.
*/
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index f0ae0b2ee2e6..a592d10e5c76 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -1577,6 +1577,7 @@ static int vmw_kms_check_display_memory(struct drm_device
*dev,
static int vmw_kms_check_topology(struct drm_device *dev,
struct drm_atomic_state *state)
{
+ struct vmw_private *dev_priv = vmw_priv(dev);
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
struct drm_rect *rects;
struct drm_crtc *crtc;
@@ -1588,6 +1589,8 @@ static int vmw_kms_check_topology(struct drm_device *dev,
if (!rects)
return -ENOMEM;
+ mutex_lock(&dev_priv->requested_layout_mutex);
+
drm_for_each_crtc(crtc, dev) {
struct vmw_display_unit *du = vmw_crtc_to_du(crtc);
struct drm_crtc_state *crtc_state = crtc->state;
@@ -1595,10 +1598,6 @@ static int vmw_kms_check_topology(struct drm_device *dev,
i = drm_crtc_index(crtc);
if (crtc_state && crtc_state->enable) {
- /*
- * There could be a race condition with update of gui_x/
- * gui_y. Those are protected by dev->mode_config.mutex.
- */
rects[i].x1 = du->gui_x;
rects[i].y1 = du->gui_y;
rects[i].x2 = du->gui_x + crtc_state->mode.hdisplay;
@@ -1636,6 +1635,7 @@ static int vmw_kms_check_topology(struct drm_device *dev,
rects);
clean:
+ mutex_unlock(&dev_priv->requested_layout_mutex);
kfree(rects);
return ret;
}
@@ -1987,10 +1987,14 @@ static int vmw_du_update_layout(struct vmw_private
*dev_priv,
struct drm_device *dev = dev_priv->dev;
struct vmw_display_unit *du;
struct drm_connector *con;
+ struct drm_connector_list_iter conn_iter;
- mutex_lock(&dev->mode_config.mutex);
-
- list_for_each_entry(con, &dev->mode_config.connector_list, head) {
+ /*
+ * Currently only gui_x/y is protected with requested_layout_mutex.
+ */
+ mutex_lock(&dev_priv->requested_layout_mutex);
+ drm_connector_list_iter_begin(dev, &conn_iter);
+ drm_for_each_connector_iter(con, &conn_iter) {
du = vmw_connector_to_du(con);
if (num_rects > du->unit) {
du->pref_width = drm_rect_width(&rects[du->unit]);
@@ -1998,6 +2002,21 @@ static int vmw_du_update_layout(struct vmw_private
*dev_priv,
du->pref_active = true;
du->gui_x = rects[du->unit].x1;
du->gui_y = rects[du->unit].y1;
+ } else {
+ du->pref_width = 800;
+ du->pref_height = 600;
+ du->pref_active = false;
+ du->gui_x = 0;
+ du->gui_y = 0;
+ }
+ }
+ drm_connector_list_iter_end(&conn_iter);
+ mutex_unlock(&dev_priv->requested_layout_mutex);
+
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(con, &dev->mode_config.connector_list, head) {
+ du = vmw_connector_to_du(con);
+ if (num_rects > du->unit) {
drm_object_property_set_value
(&con->base, dev->mode_config.suggested_x_property,
du->gui_x);
@@ -2005,9 +2024,6 @@ static int vmw_du_update_layout(struct vmw_private
*dev_priv,
(&con->base, dev->mode_config.suggested_y_property,
du->gui_y);
} else {
- du->pref_width = 800;
- du->pref_height = 600;
- du->pref_active = false;
drm_object_property_set_value
(&con->base, dev->mode_config.suggested_x_property,
0);
@@ -2017,8 +2033,8 @@ static int vmw_du_update_layout(struct vmw_private
*dev_priv,
}
con->status = vmw_du_connector_detect(con, true);
}
-
mutex_unlock(&dev->mode_config.mutex);
+
drm_sysfs_hotplug_event(dev);
return 0;
--
2.18.0.rc1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
