Hi, Stu:
On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> This patch add the connection from RDMA1 to DSI3
>
> Signed-off-by: Stu Hsieh <stu.hs...@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> index c3e647b04ffd..a5cee4b7f908 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> @@ -88,12 +88,14 @@
> #define RDMA0_MOUT_DSI3 0x5
> #define RDMA1_MOUT_DSI1 0x1
> #define RDMA1_MOUT_DSI2 0x4
> +#define RDMA1_MOUT_DSI3 0x5
Usually, each bit of a mout register represent a output enable. Is this
value 0x5 a correct value?
Regards,
CK
> #define RDMA1_MOUT_DPI0 0x2
> #define RDMA1_MOUT_DPI1 0x3
> #define DPI0_SEL_IN_RDMA1 0x1
> #define DPI1_SEL_IN_RDMA1 (0x1 << 8)
> #define DSI1_SEL_IN_RDMA1 0x1
> #define DSI2_SEL_IN_RDMA1 (0x1 << 16)
> +#define DSI3_SEL_IN_RDMA1 (0x1 << 16)
> #define COLOR1_SEL_IN_OVL1 0x1
>
> #define OVL_MOUT_EN_RDMA 0x1
> @@ -182,6 +184,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id
> cur,
> } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI2) {
> *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> value = RDMA1_MOUT_DSI2;
> + } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
> + *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> + value = RDMA1_MOUT_DSI3;
> } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> value = RDMA1_MOUT_DPI0;
> @@ -216,6 +221,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id
> cur,
> } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI2) {
> *addr = DISP_REG_CONFIG_DSIE_SEL_IN;
> value = DSI2_SEL_IN_RDMA1;
> + } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
> + *addr = DISP_REG_CONFIG_DSIO_SEL_IN;
> + value = DSI3_SEL_IN_RDMA1;
> } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> value = COLOR1_SEL_IN_OVL1;
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
