Hi Rob, Thank you for the patch.
On Friday, 11 May 2018 17:33:23 EEST Rob Herring wrote: > The rcar DT overlays are missing symetrical remote-endpoint properties > in their graph nodes because the remote-endpoint is fixed up at > run-time. Disable the dtc 'graph-endpoint' warnings when compiling these > overlays. If this becomes a common problem for overlays, then perhaps > this check needs to be disabled for all overlays. > > Reported-by: Stephen Rothwell <s...@canb.auug.org.au> > Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > Cc: David Airlie <airl...@linux.ie> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-renesas-...@vger.kernel.org > Signed-off-by: Rob Herring <r...@kernel.org> Acked-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > --- > This needs to go thru my tree because it is dependent on the dtc update > that adds the warning (perhaps we're going to need to add option > checking for dtc). > > Rob > > drivers/gpu/drm/rcar-du/Makefile | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/gpu/drm/rcar-du/Makefile > b/drivers/gpu/drm/rcar-du/Makefile index 3e58ed93d5b1..2a3b8d7972b5 100644 > --- a/drivers/gpu/drm/rcar-du/Makefile > +++ b/drivers/gpu/drm/rcar-du/Makefile > @@ -17,3 +17,10 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_VSP) += rcar_du_vsp.o > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du-drm.o > obj-$(CONFIG_DRM_RCAR_DW_HDMI) += rcar_dw_hdmi.o > obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o > + > +# 'remote-endpoint' is fixed up at run-time > +DTC_FLAGS_rcar_du_of_lvds_r8a7790 += -Wno-graph_endpoint > +DTC_FLAGS_rcar_du_of_lvds_r8a7791 += -Wno-graph_endpoint > +DTC_FLAGS_rcar_du_of_lvds_r8a7793 += -Wno-graph_endpoint > +DTC_FLAGS_rcar_du_of_lvds_r8a7795 += -Wno-graph_endpoint > +DTC_FLAGS_rcar_du_of_lvds_r8a7796 += -Wno-graph_endpoint -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
