On Lu, 2018-05-07 at 11:50 -0500, Rob Herring wrote:
> On Thu, May 03, 2018 at 05:26:02PM +0300, Robert Chiras wrote:
> >
> > Signed-off-by: Robert Chiras <robert.chi...@nxp.com>
> > ---
> > .../bindings/display/panel/raydium,rm67191.txt | 38
> > ++++++++++++++++++++++
> > 1 file changed, 38 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t
> > xt
> > b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t
> > xt
> > new file mode 100644
> > index 0000000..0fe6d4b
> > --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t
> > xt
> > @@ -0,0 +1,38 @@
> > +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
> > +
> > +Required properties:
> > +- compatible: "raydium,rm67191"
> > +- reg: virtual channel for MIPI-DSI
> > protocol
> > + must be <0>
> > +- dsi-lanes: number of DSI lanes to be used
> > + must be <3> or <4>
> > +- port: input port node with endpoint definition
> > as
> > + defined in
> > Documentation/devicetree/bindings/graph.txt;
> > + the input port should be connected to a
> > MIPI-DSI device
> > + driver
> > +
> > +Optional properties:
> > +- reset-gpio: a GPIO spec for the RST_B GPIO pin
> > +- pinctrl-0 phandle to the pin settings for the
> > reset pin
> > +- panel-width-mm: physical panel width [mm]
> > +- panel-height-mm: physical panel height [mm]
> width-mm and height-mm are the common property names.
OK, I will change them accordingly.
>
> >
> > +
> > +[1]: Documentation/devicetree/bindings/display/display-timing.txt
> Footnote to what?
In the previous version it had an optional display-timing property. I
removed it in this version, but I forgot to remove the footnote. I will
remove this in the next version of the patch-set.
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
