On Mon, Apr 30, 2018 at 05:10:46PM +0530, Jagan Teki wrote:
> HDMI on Allwinner A64 has similar behavior like H3/H5, so
> reuse the same dts node details for A64.
> 
> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28 
> +++++++++++++++++++++++++++
>  include/dt-bindings/clock/sun50i-a64-ccu.h    |  2 ++
>  2 files changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi 
> b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 67b80bbe5bf5..da9128ae836d 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -644,6 +644,34 @@
>                       #interrupt-cells = <3>;
>               };
>  
> +             hdmi: hdmi@1ee0000 {
> +                     compatible = "allwinner,sun50i-a64-dw-hdmi",
> +                                  "allwinner,sun8i-a83t-dw-hdmi";
> +                     reg = <0x01ee0000 0x10000>;
> +                     reg-io-width = <1>;
> +                     interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
> +                              <&ccu CLK_HDMI>;
> +                     clock-names = "iahb", "isfr", "tmds";
> +                     resets = <&ccu RST_BUS_HDMI1>;
> +                     reset-names = "ctrl";
> +                     phys = <&hdmi_phy>;
> +                     phy-names = "hdmi-phy";
> +                     status = "disabled";
> +             };
> +
> +             hdmi_phy: hdmi-phy@1ef0000 {
> +                     compatible = "allwinner,sun50i-a64-hdmi-phy",
> +                                  "allwinner,sun8i-h3-hdmi-phy";
> +                     reg = <0x01ef0000 0x10000>;
> +                     clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
> +                              <&ccu CLK_PLL_VIDEO1>;
> +                     clock-names = "bus", "mod", "pll-0";
> +                     resets = <&ccu RST_BUS_HDMI0>;
> +                     reset-names = "phy";
> +                     #phy-cells = <0>;

HDMI is disabled by default, but the phy is not?

> +             };
> +
>               rtc: rtc@1f00000 {
>                       compatible = "allwinner,sun6i-a31-rtc";
>                       reg = <0x01f00000 0x54>;
> diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h 
> b/include/dt-bindings/clock/sun50i-a64-ccu.h
> index d66432c6e675..41c09df797ef 100644
> --- a/include/dt-bindings/clock/sun50i-a64-ccu.h
> +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
> @@ -45,6 +45,8 @@
>  
>  #define CLK_PLL_PERIPH0              11
>  
> +#define CLK_PLL_VIDEO1               15
> +

This belongs in the clock binding patch.

>  #define CLK_BUS_MIPI_DSI     28
>  #define CLK_BUS_CE           29
>  #define CLK_BUS_DMA          30
> -- 
> 2.14.3
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to