On Fri, Apr 27, 2018 at 4:39 AM, Sandeep Panda <spa...@codeaurora.org> wrote: > Document the bindings used for the sn65dsi86 DSI to eDP bridge. > > Changes in v1: > - Rephrase the dt-binding descriptions to be more inline with existing > bindings (Andrzej Hajda). > - Add missing dt-binding that are parsed by corresponding driver > (Andrzej Hajda). > > Changes in v2: > - Remove edp panel specific dt-binding entries. Only keep bridge > specific entries (Sean Paul). > - Remove custom-modes dt entry since its usage is removed from driver also > (Sean Paul). > - Remove is-pluggable dt entry since this will not be needed anymore (Sean > Paul). > > Changes in v3: > - Remove irq-gpio dt entry and instead populate is an interrupt > property (Rob Herring). > > Changes in v4: > - Add link to bridge chip datasheet (Stephen Boyd) > - Add vpll and vcc regulator supply bindings (Stephen Boyd) > - Add ref clk optional dt binding (Stephen Boyd) > - Add gpio-controller optional dt binding (Stephen Boyd) > > Signed-off-by: Sandeep Panda <spa...@codeaurora.org> > --- > .../bindings/display/bridge/ti,sn65dsi86.txt | 76 > ++++++++++++++++++++++ > 1 file changed, 76 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
Reviewed-by: Rob Herring <r...@kernel.org> _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
